Playing A Disc - Samsung DVD-1080P7 User Manual

C h a p t e r 3
B
A S I C

Playing a Disc

Before Play
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV's
remote control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and set
it to the correct Audio Input.
After plugging in the player, the first time you press the DVD
to the right appears: If you want to select a language, press a
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want to
use.
Once you select a menu language, you can change it by pressing the
front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
1
Press the OPEN/CLOSE
( ) button.
The STANDBY indicator
light goes out and the tray
opens.
2
Place a disc gently into the
tray with the disc's label
facing up.
3
Press the PLAY/PAUSE (
button or OPEN/CLOSE (
button to close the disc
F
U N C T I O N S
)
)
tray.
+
/
POWER button, the screen
NUMBER button.
button on the
-
RESUME function
When you stop disc
where you stopped, so when you press the
PLAY/PAUSE (
where you left off.
ENG-20
play, the player remembers
) button again, it will pick up