Troubleshooting
Refer to the following table if you are experiencing trouble with your camera.
Contact an authorized technician if the table does not provide you with a
solution to the trouble.
Problem
No display
• Check the power cable and the wiring between the
camera and the monitor.
• Ensure proper video cable connection (Video Out
Jack).
Dim display
• The lens could be dirty. Clean with a soft, clean
piece of cloth.
• Adjust monitor settings.
• Adjust camera position if exposed to a strong light
source.
Dark display
• Adjust the monitor's contrast level.
• Set the intermediate device, if in use, to 75Ω/ Hi-z
(refer to p.15).
The camera is not
• Check the power source for compliance with
functioning properly and
specifications.
its surface is hot
Motion Detection
• Ensure that the feature is set to ON.
feature is not active.
42
COLOR CCD CAMERA
Solution
User's Manual
Problem
Uneven colors
• Adjust and configure WHITE BAL.
Flickering
• The camera may be facing the sun or a fluorescent
light. Adjust the position of the camera.
Can't select LL mode
• The camera may be connected to a DC power
source. Connect to an AC power source.
LL is not function
• Check external SYNC signal frequency (should be
properly.
60Hz for NTSC, 50Hz for PAL).
43
COLOR CCD CAMERA
Solution
User's Manual