Fujitsu AU*G30LRLE Design & Technical Manual page 38

9) Remote controller signal code
Change the indoor unit Signal Code, depending on the remote controllers.
Setting Description
A

B
C
D
10) External input control
"Operation/Stop" mode or "Forced stop" mode can be selected.
Setting Description
Operation/Stop mode

(Setting forbidden)
Forced stop mode
11) Indoor unit fan control for energy saving (Only cooling mode)
Enable or disable indoor unit fan control when the outdoor unit is stopped.
Setting Description
No
Yes

* If setting value is "00":
When the outdoor unit is stopped, the indoor unit fan operates following the setting on the remote
controller continuously.
* If setting value is "01":
When the outdoor unit is stopped, the indoor unit fan operates at very low speed intermittently.
Function Number Setting Value
44
(  . . . Factory setting)
Function Number Setting Value
46
(  ... Factory setting)
Function Number Setting Value
49
- (01 - 35) -
00
01
02
03
00
01
02
00
01