Table of Contents
Advertisement
Setup 2 (
)
[ LCD save ]
■ If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
● [LCD save] sub menu
[Off]: The LCD monitor will not be turned off.
[On]: If you select the [LCD Save] and the camera
isn't operated during the specified time(about
30 SEC.), the camera power will be idle(LCD
monitor : OFF, Camera status lamp :
Blinking) automatically. To use the camera
again, press any of the camera buttons
except the power button.
INFORMATION
● After replacing the battery or connect the AC adapter again, the poweroff
setting will be preserved.
● Note that the LCD save function will not operate if the camera is in PC /
Printer mode, slide show and playing back a movie clip.
[ Selecting Video out type ]
■ The Movie output signal from the camera can be NTSC or PAL.
■ Connecting to an external monitor
SETUP2
● When the camera is connected to an external
Quick View
Power Off
LCD Save
Off
Video Out
On
Format
Reset
◀
O O K K
Back
Set
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
monitor in the recording mode or play back mode,
the image (movie or still image) will be visible on
the external monitor and the LCD monitor of the
camera turns off.
SETUP2
Quick View
Power Off
LCD Save
Video Out
NTSC
Format
PAL
Reset
◀
Back
O O K K
Set
Yellow - Video
White - sound
《47》
Advertisement
Table of Contents
