Using the camera buttons to set the camera
Using the camera buttons to set the camera
Image enlargement
1. Select an image that you want to enlarge and
press the Enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the Thumbnail button will zoom back
to the original full sized image.
– You can tell whether the image
displayed is an enlarged view by
checking the image enlargement
indicator shown at the top left of the
LCD monitor. (If the image is not an
enlarged view, the indicator will not
be displayed.) You can also check
the area of enlargement.
– Movie clips and WAV fi les can't be enlarged.
– If an image is enlarged, a loss of quality may occur.
The maximum enlargement rate in proportion to the image size
enlargement rate
Trimming : You can extract part of the image that you want and
save it separately.
1. Select an image that you want to
x 2.0
2. Select a desired sub menu by pressing
Image size
Maximum
X12.8
X12.4
enlarge and press the enlargement
button. Press the MENU/OK button and
OK
OK button and
a message will be displayed.
the Up/Down button and press the OK
button.
– [No]: The trimming menu will disappear.
– [Yes]: The trimmed image will be saved as a new fi le name, and
appear on the LCD monitor.
If there is not enough memory space to save the trimmed image, the
image can't be trimmed.
X12.8
X10.1
X8.0
X4.0
x 2.0
Trimming?
No
Yes
OK
Confirm
067