Metering; Iso - Samsung i85 User Manual

Metering

Metering
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
Metering
Icon
Mode
Exposure will be calculated based on an average
of light in each image area divided into multiple
[Multi] regions. However, the calculation will be biased
towards the centre of the image area. This is
suitable for general use.
Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
[Spot]
when the subject in the centre is exposed correctly,
regardless of the back lighting.
Exposure will be calculated based on an average of
the available light in the image area. However, the
[Center] calculation will be biased towards the centre of the
image area. This is suitable for taking a picture of
small objects like fl owers or insects.
If the subject is not the centre of the focus area, do not use the spot

metering as this may result in an exposure error. In this circumstance, it is
better to use exposure compensation.
038
multi
Description

ISO

You can select the ISO sensitivity when taking pictures.
The speed or specifi c light-sensitivity of a camera is rated by ISO
numbers.
Icon ISO Mode
The camera's sensitivity is automatically changed
[Auto] by variables such as lighting value or subject
brightness.
You can increase the shutter speed while the same
[ISO 80]
amount of light is present, by increasing the ISO
[ISO 100]
sensitivity. However, the image may be saturated in high
[ISO 200]
luminance. The higher the ISO value, the higher the
camera's sensitivity to light and therefore the greater its
[ISO 400]
capacity to take pictures in dark conditions. However,
[ISO 800]
the noise level in the image will increase as the ISO
[ISO 1600]
value increases, making the image appear coarse.
AUTO
Description