Table of Contents
Advertisement
SETTING UP CAMERA SYSTEM
Reference
Date will be imprinted as DATE TYPE setting.
TIME is imprinted in the following way: [hour / minute / second].
Hours are shown using the 24 hour clock.
The IMPRINT function is unaffected by the camera being switched on and off.
DATE TYPE
You can select date type that is imprinted on the image.
- YYYY/MM/DD : year /month/ day
- DD/MM/YYYY : day /month /year
- MM/DD/YYYY : month/ day /year
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode (
3. [SETUP 1/3] menu will show on the LCD monitor.
4. Select [SETUP 2/3] menu by pressing the LEFT (
RIGHT (
) buttons.
5. Press the DOWN button (
6. Shift the cursor to the [DATE TYPE] sub menu by
pressing the RIGHT button (
7. Select the desired sub menu by pressing the UP (
DOWN (
) buttons. The default is YYYY/MM/DD.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
).
) and select [DATE TYPE].
)
SETUP
DATE SETUP
IMPRINT
) /
DATE TYPE
USER SET
BACK :
) /
2/3
YYYY/MM/DD
DD/MM/YYYY
MM/DD/YYYY
SET : OK
Advertisement
Table of Contents
