Table of Contents
Advertisement
FAQ
About USB
[Case 7] There is an unexpected error during file transfer.
Turn the camera power off and on again. Then transfer the file again.
[Case 8] How do I know my computer supports USB Interface?
Check the USB port in your computer or keyboard.
Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME
.XP.
Check [Universal serial bus controller] in Device Manager.
Do the following to check [Universal serial bus controller].
Win 98/ME : Trace [start
Win 2K : Trace [start
Manager
Win XP : Trace [start
system
controller].
There must be USB Host Controller and USB root hub under [Universal serial bus
controller].
When all the conditions mentioned above are met, the computer can support the
USB interface.
[Case 9] When using USB hub.
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
[Case 10] Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC with another USB
cable. In this case, disconnect the other USB cable, and connect only one USB
cable to the camera.
setting
Universal serial bus controller].
setting
controller
Universal serial bus controller].
Control Panel
Hardware
Device Manager
controller
system
system
Hardware
Performance and Maintenance
Universal Serial Bus
Device Manager
Device
Advertisement
Table of Contents
