Samsung Digimax350 SE User Manual page 71

SETTING UP CAMERA SYSTEM
IMPRINT
There is an option to include DATE/TIME on still images.
There are 3 types of IMPRINT.
- OFF: IMPRINT function is cancelled.
- DATE: The date is included in the still image.
- DATE & TIME: The date and time is included in the still image.
This function is not available in movie clip shot.
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode (
3. [SETUP 1/3] menu will display on the LCD monitor.
4. Select [SETUP 2/3] menu by pressing the LEFT (
RIGHT ( ) buttons.
5. Press the DOWN button (
6. Shift the cursor to the [IMPRINT] sub menu by pressing
the RIGHT button (
7. Select the desired sub menu by pressing the UP (
DOWN ( ) buttons. The default is OFF.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
Recorded date and time will be imprinted in the bottom right hand corner of the image.
< Date imprinting >
).
) and select [IMPRINT].
)
SETUP
DATE SETUP
IMPRINT
) /
DATE TYPE
USER SET
BACK :
) /
< Date and Time imprinting >
2/3
OFF
DATE
DATE &TIME
SET : OK