Advertisement
3.1.11 Removing the mode switch
(See Fig.16)
• Remove the top cover, base board, chassis unit, clamper as-
sembly, trigger arm and top plate assembly.
(1) From the top side of the top plate assembly, remove the
link gear spring from the sections x of the link gear L and
link gear R.
(2) Remove the link gear L in an upward direction while releas-
ing the claws y of the link gear L in the direction of the ar-
row.
(3) Move the mode switch in the direction of the arrow 1 to re-
move the sections z of the top plate assembly.
(4) Move the mode switch in the direction of the arrow 2 and
remove the mode switch from the sections (aa, ab).
Note:
When reattaching the link gear L, attach it after aligning the
hole ac of the link gear L to the hole ac of the link gear R.
Reference:
When reassembling, reverse the above removing procedure.
Top plate assembly
Link gear spring
aa
Link gear R
Link gear L
Link
Link
gear R
gear L
ac
ac
Fig.16
Mode switch
x
y
y
1
ab
2
z
(No.MY008)1-13
Advertisement
