Quick View - Samsung Digimax U-CA 401 User Manual

Quick view

If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]
[1 ~ 3 SEC]
5. Press the menu button twice and the menu will disappear.
: The quick view function can't be activated.
: The captured image is briefly displayed during the selected time.
AUTO
SET UP
LAMP
VIDEO
OFF
Q.VIEW
BACK: SET:OK
63