Inserting The Memory Card; Battery - Samsung DIGIMAX S700 User Manual

Connecting to a Power Source
INFORMATION
Important information about battery usage
When the camera is not used, turn off the camera power.
Please remove the battery if the camera will not be used for long periods.
Battery can lose power over time and are prone to leaking if kept inside the
camera.
Low temperatures (below 0˚C) can affect the performance of the battery
and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may become warm.
This is perfectly normal.
Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- When the battery chamber cover is opened,
do not press the battery chamber cover by
force. This may cause damage to the
battery chamber cover.
There are 4 indicators for battery condition that are displayed on the LCD monitor.

Battery

indicator
Low battery
Battery The battery is capacity (Prepare
status fully charged to recharge or use
spare battery)

Inserting the memory card

Insert the memory card as shown.
- Turn off the camera's power before
inserting the memory card.
- Have the front of the memory card facing
toward the front of the camera (lens) and
the card pins toward the back of the
camera (LCD monitor).
- Do not insert the memory card the wrong
way round. Doing so may damage the
memory card slot.
Low battery Low battery
capacity (Prepare capacity (Prepare
to recharge or use to recharge or use
spare battery) spare battery)
9