Table of Contents
Advertisement
PictBridge: Printing
■ Printing Pictures
1. Connect the camera to your printer. The USB menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.63)
2. Use the LEFT and RIGHT buttons to select the [PRINT]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[STANDARD] : Print the pictures stored in the memory
[INDEX]
: Print multiple images on one sheet of paper.
4. The screen shown on the right will appear and the picture will be printed. If no picture is
selected, the
[NO IMAGE!] message will be displayed. Press the
shutter button while printing to cancel the printing and
the [IMAGES] menu is displayed.
※ Number of pictures in a index print varies depends on
the printer used.
■ DPOF PRINT : This allows you to directly print the files with DPOF information.
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.63)
2. Use the LEFT and RIGHT buttons to select the [DPOF
PRINT] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[NO] : Cancel the printing
[YES]: Directly print the file with the DPOF information
※ Depending on the manufacturer and printer model, some menus may not be available.
With a printer without supporting the DPOF, the menu is still displayed but not available.
card in set numbers. One picture is printed on one piece of paper.
◀
PRINT
STANDARD
INDEX
▲
MOVE:
SET:OK
▼
NOW PRINTING
001/001
EXIT:SH
◀
DPOF PRINT
NO
YES
▲
MOVE:
SET:OK
▼
《65》
▶
▶
Hide quick links:
Advertisement
Table of Contents
