Table of Contents
Advertisement
settings ( 0 )
the Date / Time / Date tzpe
You can change the date and time that the camera displays on
captured images and set up the date type. Setting [Time Zone]
enables you to display the local date and time on the LCD screen
when travelling overseas.
- Date type : [yyyy/mm/dd], [mm/dd/yyyy],
[dd/mm/yyyy], [Off]*
Time Zone
[] Available cities/Time Zones:
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Sao Paulo, Newfoundland,
Caracas, La Paz, NewYork, Miami,
Chicago, Dallas, Denver, Phoenix, LA,
San Francisco, Alaska, Honolulu, Hawaii,
Samoa, Midway, Wellington, Auckland,
Okhotsk, Guam, Sydney, Darwin, Adelaide, Seoul, Tokyo, Beijing,
Hong Kong, Bankok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai,
New Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens,
Helsinki, Rome, Paris, Berlin
File name
This function allows you to select the file naming format.
[Reset]
: After using the reset function,
the next file name is started at
0001 even after you've formatted,
deleted all, or inserted a new
memory card.
[Series]* : New files are named using
numbers that follow the previous sequence, even if
you've installed a new memory card, formatted the
memory, or deleted all pictures.
- The first stored folder name is 100PHOTO, and the first file
name is SAM_0001.
- File names are assigned sequentially from SAM_0001 -+
SAM_0002
-e to -e SAM_9999.
- The folder number is assigned sequentially from 100 to 999 as
follows: 100PHOTO -e 101PHOTO -e ~ -+ 999PHOTO.
-The maximum number of files in a folder is 9999.
- The files used with the memory card conform to the DCF (Design
rule for Camera File systems) format. If you change the image
file name, the image may not play back.
DST : Daylight Saving Time
59
Advertisement
Table of Contents
