Table of Contents
Advertisement
Shooting(_
ACB
The ACB function adjusts the contrast
automatically when there are big differences in
brightness between objects in the photo frame
or between your subject and the surrounding
environment. This lets you photograph subjects
clearly.
- [ACB] Sub menus: [Off], [On].
When you are using the [Program] mode, the ACB function will
operate.
Drive mode
You can select single, continuous, motion capture, and AEB (Auto
Exposure Bracketing).
[Single]([])
[Continuous] (_J)
[MotionCapture](1_)
[AEB] (_)
: Take one picture only.
: Takes pictures
continuously until you
release the shutter
button.
: Takes 7 shots per
second when you
press and hold down the shutter button. After
you've completed continuous shooting, the
camera saves the images, and then plays
them back on the Rear LCD. The maximum
number of shots is 30 and the image size is
fixed as 1 Megapixel.
: Takes three consecutive pictures using different
exposures: standard exposure (O.0EV), short
exposure (-I/2EV) and over exposure (+I/2EV).
• High resolution and picture quality increases file saving time,
which increases stand-by time.
® If you select the [Continuous], [Motion Capture], or [AEB] sub
menu, the camera automatically turns the flash off.
® If there is space for less than 3 pictures are available on the
memory, the AEB shooting is not available.
® It is best to use a tripod for AEB shooting as the time to save
each image file is longer, and blurring caused by camera shake
can occur.
51
Advertisement
Table of Contents
