Table of Contents
Advertisement
Flash ( _ ) / Left button
When the menu is displayed on the LCD
screen, pressing the Left button makes
the cursor shift to the left tab.
When the menu is not displayed on the
LCD screen, the Left button operates as
the Flash ( _ ) button.
[Selecting the Auto flash]
[] Selecting the Flash mode
1. Select the desired Recording mode, except for the [Movie]
mode. (p.23)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD screen (Fill-in, Red-eye Reduction,etc.).
3. Aflash mode indicator will be displayed on the LCD screen.
Use the correct flash mode to suit the environment.
o
If you press the shutter button after selecting the flash, the first
flash fires to check the shooting condition (Flash range and
Power ratio of flash). Do not move the camera until the second
flash fires.
• Using the flash frequently will reduce the life of the battery.
• Under normal operating conditions the re-charging time for
the flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
• The camera flash does not operate in the [Movie] and some
Scene modes.
• Take photographs within the flash range.
• The image quality can be degraded if the subject is too close
or highly reflective.
• When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the flash light reflecting off atmospheric dust.
[] Flash range
Unit: m (inches)
N
i
:
0_8~3.0
0.8~2.0
0.2~0.8
0.5~0.8
0.2~3.0
0.5~2.0
(31~118)
(31~79)
(8~31)
(20~31)
(8~118)
(20~79)
35
Advertisement
Table of Contents
