Advertisement
There are several ways to make calls to desired destination in VIP-152T. In this chapter,
we'll lead you step by step to establish your first voice communication via keypad
operations.
3.1 IP address call (P2P mode):
Please refer to the descriptions in previous chapter to complete machine network
parameter configurations.
G
Hint
G
Hint
After machine network configuration is completed, you may now open web browser to
log in machine to add the remote calling party in machine phone book to establish voice
communications.
Before starting web browser to connect to VIP-152T, please check TCP/IP configurations
on PC: the PC must be configured either as a DHCP client and or fixed IP allocation on
the intranet or Internet. After ensuring TCP/IP configuration on the workstation, you may
connect to web administration page of VIP-152T either from intranet, or Internet
After TCP/IP configurations on your PC, you may now open your web browser, and input
192.168.0.1 to logon VIP-152T web configuration page.
VIP-152T will prompt for logon username/password: root / null (without password)
Please identify the proper network connection type on your
side, and find the appropriate connection method supported
by VIP-152T
When key in IP address/Subnet Mask/Gateway values,
please add 0 before IP address (ex.192.168.0.1 please key
in 192.168.000.001) for machine operation.
Chapter 3
Making calls
11
Advertisement
