Related Manuals for Planet VIP-103PT
Summary of Contents for Planet VIP-103PT
- Page 1 PLANET PoE IP Phone User’s Manual H.323/SIP PoE IP Phone VIP-103PT / VIP-153PT / VIP-153T User’s Manual...
- Page 2 Copyright Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
-
Page 3: Table Of Contents
2.1 Initialize VIP103PT/VIP-153PT/VIP-153T ... 8 2.2 LCD Menu Configuration... 9 Chapter 3 ...19 Configuring the VIP-103PT/VIP-153PT/ VIP-153T through Web Pages...19 Step 1. Browse the IP Address of your IP phone ... 19 Step 2. Input the login name and password ... 19 Step 3. -
Page 4: Chapter 1
VIP-153T and the VIP-153PT can help you to complete VoIP network deployment in minutes. The same as H.323 model, VIP-103PT is able to be integrated with PLANET IP PBX system IPX-1000/IPX-1500 as one of the extensions in your office network. -
Page 5: Hardware Overview
PC-to-Phone/Phone-to-PC or enterprise VoIP environments. Standards compliant The VIP-103PT complies with H.323 version 4, and supports H.323 fast start, H.245 tunneling, GateKeeper H.235 security mode for different occasions. The VIP-153T / VIP-153PT complies with SIP 2.0 (RFC3261), interoperates with 3rd party SIP voice gateways/terminal/software as well as other PLANET VoIP products. -
Page 6: Keypad Description
PLANET PoE IP Phone User’s Manual Keypad Description The red light goes on-off when there is an incoming call. Light LCD Display Menu and all status shall be displayed for users. To scroll up the menu items or left delete a digit per each key UP”... -
Page 7: Rear View
PLANET PoE IP Phone User’s Manual 1.1.2 Rear View Rear Panel of VIP-103PT/VIP-153PT/VIP-153T RJ-45 connector, to maintain the existing network structure, connected directly to the PC through straight CAT-5 cable RJ-45 connector, for Internet access, connected directly to Switch/Hub through straight CAT-5 cable. -
Page 8: Chapter 2
Wait for 10 seconds, the main LCD screen shall be shown as below, and when the Internet access is available, the VIP-103PT / VIP-153PT / VIP-153T will connect to the SNTP server. The current time will be displayed on the LCD. -
Page 9: Lcd Menu Configuration
PLANET PoE IP Phone User’s Manual 2.2 LCD Menu Configuration LCD menu configuration for VIP-103PT 1st Level IP PBX mode 1.1 (On/Off) If Yes: 1.2 Hotline IP Address Check the active network parameters in machine View 2.1 Network Value 2.2 IP PBX Mode 2.2 Ping... - Page 10 2.1.1 (Yes/No) Dynamic IP 2.1.2 (Yes/No) PPPoE If Yes: 2.1.3 Fixed IP 2.1.4 GMT 2.2.1 Username 2.2.2 Telephone Number 2.2.3 Password 2.2.4 (Yes/No) Proxy mode If Yes: Proxy Server Address 2.2.5 (Yes/No) Outbound Proxy If Yes: Outbound Proxy Address 2.2.6 SIP Domain Name 2.2.7 Frame Size...
- Page 11 PLANET PoE IP Phone User’s Manual “View” menu In the “View” main menu, there are submenus, users may check these items for machine information and also provide some simple functions to check the network status of the IP Phone. 1.1 View current network settings By selecting “View”...
- Page 12 168.95.1.1) to ping it. When the response is ok, then the network configurations are completed. 2.1.4 GMT Via selecting the time zone in the GMT menu, VIP-103PT/VIP-153PT/VIP-153T is able to retrieve time information from timeserver on the net. →...
- Page 13 VoIP vendor/service provider. 2.2.1 Registration to a H.323 gatekeeper (VIP-103PT) When VIP-103PT is installed in an H.323 GK enabled network, the VIP-103PT registers to the gatekeeper for voice communications. Following descriptions are parameters to complete the registration.
- Page 14 Not every proxy server needs this field, if not needed, keep it empty. • The SIP telephone number, login ID and password fields are application-oriented parameters. Please be sure to check with Note your service provider to get the proper information before inputting parameters.
- Page 15 Hi (GK off) Means that the VIP-103PT is working OK and ready for outgoing/incoming calls. But the “GK mode ” flag is “No”, i.e. the VIP-103PT not need to register. In this case, can call the IP address of other VIP-103PT directly.
- Page 16 VIP-103PT/VIP-153PT/VIP-153T is workin outgoing/incoming calls. VIP-103PT/VIP-153PT/VIP-153T not needs to register. In this case, can call the IP address of other VIP-153PT/VIP-153T directly. When the PoE IP Phone is failed in registering to a H.323 gatekeeper or SIP proxy...
- Page 17 When the PoE IP Phone is enable the “Immediate Forward”, the LCD screen will display the following message: FWD (Number) Means that the VIP-103PT is working OK and ready for outgoing/incoming calls. But for any incoming call, it will be forwarded to the “Immediate Forward Number” e Time...
- Page 18 PLANET PoE IP Phone User’s Manual this PoE IP Phone will not ring. 2.3 Call Forward Configurations The PoE IP Phone supports three select “Configure” → ”Forward Mode” for these three kinds of selection: 2.3.1 Immediate Forward Under “Forward Mode by selecting Yes on (Yes/No) Immediate and input the number he/she would like the call to be forwarded to.
-
Page 19: Chapter 3
PLANET PoE IP Phone User’s Manual VIP-103PT/VIP-153PT/ VIP-153T VIP-103PT/VIP-153PT/VIP-153T are equipped with a web-based graphical user interface that can cover most configurations and machine status monitoring. Via standard, web browser, you can configure and check machine status from anywhere around the world. -
Page 20: Step 4. Start Machine Configurations
After parameter modifications, it is required to browse to the Note “System Configuration” page to reboot VIP-103PT/VIP-153PT/VIP-153T to make changes effective. 2. Network Configuration Please select the “Network Configuration” icon on the left menu; the following page will display to allow you to set all the network related configurations... -
Page 21: Network Configurations
PPPoE Password: set PPPoE authentication password. Fixed IP • IP Address: IP Address of VIP-103PT/VIP-153PT/VIP-153T Subnet Mask: setup the subnet mask of VIP-103PT/VIP-153PT/VIP-153T Default routing gateway: setup default gateway of VIP-103PT/VIP-153PT/VIP-153T DNS Server: setup domain name server IP address. Others: MAC Address: MAC address of the PoE IP Phone •... - Page 22 PLANET PoE IP Phone User’s Manual After setting up network parameters, be sure to apply settings (via “DONE” button) and browse to “System Configuration” menu to reboot the machine to make the settings effective Connection Type Data required. Dynamic IP (DHCP In most circumstances, it is no need to configure the DHCP client) settings.
-
Page 23: Configuration (Vip-103Pt)
Please select the “H.323 Configuration” icon on the left menu; the following page will displayed for H.323 related configurations. H.323 Parameters: Telephone Number: insert telephone number of VIP-103PT when registering to • Gatekeeper. Password: the authorized password in the gatekeeper application •... -
Page 24: Forward Mode
PLANET PoE IP Phone User’s Manual GK mode: Enable/disable Gatekeeper function. • GK IP: Set Gatekeeper IP address or Domain Name. • RAS/Q931 Port: communication port number of the Gatekeeper for VIP-103PT to • send messages. Forward Mode: Immediate: enable/disable Immediate Forward function. -
Page 25: Sip Configuration (Vip-153Pt/Vip-153T)
Username: the username to register to Proxy Server. If Proxy server doesn’t • request specific username, please enter line number here. Telephone Number: the telephone number of VIP-153PT/VIP-153T to register to • SIP proxy. Password: the password used to register to SIP proxy. This parameter will not be •... - Page 26 PLANET PoE IP Phone User’s Manual circumstances, please setup the username same as telephone number for SIP registration. Proxy mode: enable/disable SIP proxy mode. • Proxy Server Address: SIP proxy IP address or domain name. • Proxy Port: setup proxy port for SIP proxy communication.
-
Page 27: Phone Configuration (Vip-103Pt)
PLANET PoE IP Phone User’s Manual 4. Phone Configuration (VIP-103PT) Please browse to the “Phone configuration” on the left m enu, following page will be displayed for phone call and voice codec related configurations. -
Page 28: Hot Line
PLANET PoE IP Phone User’s Manual IP PBX Setting: IP PBX Sett ing: enable/disable IP PBX support. • Name: extension name displayed on the LCD scr • Number: extension number displayed on the LCD scre • • Current supported IP PBX system: PLANET IPX-1000/IPX-1500 Note Hot Line: Auto/Ma... -
Page 29: Phone Configuration (Vip-153Pt/Vip-153T)
PLANET PoE IP Phone User’s Manual 4. Phone Configuration (VIP-153PT/VIP-153T) Please browse to the “Phone configuration” on the left menu, following p phone call and voice codec related configurations. IP PBX Setting: IP PBX Sett ing: enable/disable IP PBX function. •... -
Page 30: System Configuration
Hot Line : enable/disable hot line function. Destination URL: please input the IP addre Telephone Number: please input the telephone number of the destinatio Others: • : VAD is short for Voice Activity Detection, the IP Phone will detect if the user is talking or not, and avoid to send voice packet when the user is silent to decrease the bandwidth requirement. -
Page 31: Firmware Upgrade
FTP Server: IP address of the FTP server, which contains the firmware file of the • PoE IP phone Image File Name: firmware file name of VIP-103PT/VIP-153PT/VIP-153T. • Change web Username & Password: login is root / <no password>, you may modify the username/password for more security. -
Page 32: Speed Dial
PLANET PoE IP Phone User’s Manual 6. Speed Dial Please select the “Speed Dial” on the left menu; users may set up the speed dial related configurations. M1~M10 Name: user can specify 10 sets of speed dial via web interface. Please •... -
Page 33: Chapter 4
In peer-to-peer (P2P) mode, you can direct pickup the handset and dial the IP address of the remote VIP-103PT using the keypad as below: Then the phone of 192.168.0.2 should ring. You can do the same thing to the second VIP-103PT. - Page 34 “System Configuration” menu to reboot the machine to make the settings effective. Note: if the VIP-103PT setting DHCP client to connect the IPX-1500 DHCP server, in the hot list setting, please set up auto mode to connect the IPX-1500.
- Page 35 PLANET PoE IP Phone User’s Manual b) In the VoIP extension configuration page, please insert the IP address, MAC address information of the VIP-103PT. Assign and save the extension related parameters for the VIP-103PT.
- Page 36 In the VoIP extension configuration page, please insert the IP address, MAC address information of the VIP-103PT. After these settings, the VIP-103PT is able to act as one of the IP extensions under the IPX-1000, IPX-1500. Peer to peer (P2P) mode VIP-103PT to VIP-103PT connection via IP address Assuming there are two VIP-103PT in the network the IP address are 192.168.0.1, 192.168.0.2...
- Page 37 “#”. If the IP phones are installed behind a NAT/firewall/ IP sharing device, please make sure the NAT device support SIP applications before making calls VIP-153PT to VIP-153T connection via SIP telephone number Number: 100 VIP-153PT WAN IP Address (192.168.0.1)
-
Page 38: Voice Communication Via Sip Proxy Server - Sip-50
PLANET PoE IP Phone User’s Manual STEP 2: After these configurations, be sure to click the “DONE” button to apply settings and browse to “System Configuration” menu to reboot the machine to make the settings effective. After rebooting, the unit will communicate with the remote calling party, the LCD screen will show below: Registering (100) STEP 3:... - Page 39 PLANET PoE IP Phone User’s Manual Machine configurations on the VIP-153PT/VIP-153T: STEP 1: Log in SIP-50 and create two testing accounts/password: 1001/123 (for VIP-153PT), and 1002/123(for VIP-153T) for the voice calls. STEP 2: Please log in VIP-153PT via web browser, browse to the SIP setting menu and select the Domain Service config menu.
-
Page 40: Voice Communication Via Ip Pbx System - Ipx-2000 (Auto-Config)
PLANET PoE IP Phone User’s Manual Voice communication via IP PBX system – IPX-2000 (Auto-config) In the following sample, we’ll introduce how to integrate the SIP Phone with our IP PBX system IPX-2000 via Auto-config feature. Registration / Authentication IPX-2000 LAN IP Address: 192.168.0.50 VIP-153PT IP Address: 192.168.0.1 Machine configurations on the IPX-2000:... - Page 41 PLANET PoE IP Phone User’s Manual STEP 2: Please browse to the Device menu and create new device for the auto configuration. STEP 3: Please press the Show extensions button to create the two extension accounts/password: 1001/123 (for VIP-153PT), and 1002/123(for VIP-153T) for the voice calls.
- Page 42 PLANET PoE IP Phone User’s Manual Machine configurations on the VIP-153PT/VIP-153: STEP 5: Please log in VIP-153PT via web browser, please browse to the Phone Configuration page, and enable the IPX PBX setting features for IP PBX system. After these configurations, be sure to click the “DONE”...
-
Page 43: Poe Ip Phone Specifications
PLANET PoE IP Phone User’s Manual Product H.323 PoE IP Phone Model VIP-103PT Hardware 1 x 10/100Mbps RJ-45 port Power Over Ethernet 802.3af compliant at PT model 1 x 10/100Mbps RJ-45 port LCD display 2 x 16 characters Speaker 8 Ohm/0.2 Watt speaker for speakerphone operation...