Trane XL824 User Manual page 19

1-Touch Presets provide predetermined Heating
and Cooling Set Points for Home, Away and Sleep
time periods.
Note: 1-Touch Presets require
to be disabled. To disable Scheduling, go to
H O M E > M E N U > S C H E D U L E S > D I S A B L E
SCHEDULE, or if scheduling is disabled touch icon
on home screen.
When scheduling is disabled, heating and cooling
set points are maintained indefinitely. When a
temperature change is desired, the user must
manually adjust the XL824 Control to the new setting.
032-5090-05
Configuring 1-Touch Presets
1. To change the Cooling Set Point, press the
blue COOLING SET POINT to activate the
setting. The current System Mode indicator
Scheduling
will display blue wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
2. To change the Heating Set Point, press the
red HEATING SET POINT area to activate the
setting. The current System Mode indicator
will display red wavy lines.
Configuring 1-Touch Presets
3. Repeat the process for Home and Sleep
4. Press APPLY, then HOME to return to the
Note that when Scheduling is enabled, only the
Away preset is available and can be used for energy
savings.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
settings.
Home Screen.
page 19