Rear Panel Jacks - Samsung Tantus TXM 3098WHF Owner's Instructions Manual

Y N T V
O U R E W

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.8.
ΠAUDIO-VIDEO MONITOR
OUTPUT jacks
Connect to the audio/video input jacks of a
recording VCR.
Note: The Monitor Out does not operate in
Component 1 or 2 modes.
´,¨,ˆ VIDEO INPUT jack
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and
AV2, component 2 and AV3 input jacks are
exclusive relation with each other.
ˇ COMPONENT 1 INPUT jacks
(480i/480p/1080i)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
Ø COMPONENT 2 INPUT jacks
(480i/480p/1080i)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
∏ VHF/UHF
Connect to an antenna or to a cable TV system.
" SUB-WOOFER SPEAKER
OUT (TXM3298HF/TXM3098WHF /
TXM2798HF)
Connect to the Sub-woofer speaker jack (built in
Sub-woofer cable).
C
HAPTER
1.4
O : Y N TV
NE OUR EW