Channels; Storing Channels Automatically - Samsung SP43Q5 Owner's Instructions Manual

Storing Channels Automatically

TV Channel
Auto Store
Manual Store
Add/Delete
Sort
Name
▼ More
Move Enter
Auto Store
TV
Belgium
Country : China
Germany
Spain
- /+
Search :
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Move Enter
Auto Store
TV
Country : Belgium
Search
Move Enter
Search
Start
Enter Return
Search
P 1 C-- ----- 172MHz
Stop
Enter Return
TV Sort
From : P 1 -----
To : P-- -----
Store : ?
œ œ √ √ Adjust
Move
English - 42
➢
Not available in DTV or external input mode.
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
√ √
programme numbers. However you can sort numbers manually and
√ √
clear any channels you do not wish to watch.
√ √
√ √
1
Press the MENU (
√ √
Result:
Press the ▲ or ▼ button to select Channel.
2
Return
Result:
3
Press the ENTER (
Result:
4
Press the ENTER (
Result:
5
Press the ENTER (
by pressing the ▲ or ▼ button.
Return
The countries are displayed in the following order:
Belgium - Germany - Spain - France - Italy - Netherlands -
Switzerland - Sweden - United Kingdom - Eastern Europe -
Others.
√ √ ➢
√ √
6
Press the ENTER (
Press the ▲ or ▼ button to select Search.
7
Return
Press the œ or √ button.
8
Press the ENTER (
Result:
➢
9
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
◆ To exit from the channel store function without sorting the
10
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Return
◆
) button.
The main menu is displayed.
The options available in the Channel group are
displayed.
) button.
The Auto Store is selected.
) button again.
The options available in the Auto Store group are
displayed with Country selected.
) button once again. Select your country
If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(see page 44).
) button.
) button to start the search.
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
To stop the search before it has finished, press the MENU
( ) button.
go to Step 6 of the "Sorting the Stored Channels" procedure
on page 43.
channels, press the MENU (
menus disappear.
Sort them in the order required (see page 43)
Assign a name to the stored channels (refer to page 47)
Clear a channel (see page 46)
Fine-tune channel reception if necessary (see page 49)
Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 50)
Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 59)
) button repeatedly until the