Scanning For Active Channels - Midland MICRO MOBILE MXT105 Manual

~I
D LAN
o ____________
M_o_de_I_M_X_T_1_0_5
Scanning for Active Channels
Your MXT1 05 includes an "auto-scan" mode that continuously scans all 15
available channels for activity. Additionally, if desired, you can remove one
or more channels from the list of scanned channels.
To enter and exit ~~auto-scan" mode:
1. Be sure the radio is turned on (see Power On/Off)
2. Quickly press and release the Scan (~ button to enter "auto-scan"
mode
• The Scanning
(~icon
will show on the LCD display when the radio
is in "auto-scan" mode
• Your radio will rapidly scan through the 15 available channels and
will pause on any active channel.
• "Auto-scan" will resume when there has been no activity on the
current channel for four seconds.
3. To transmit during "auto scan," press and hold the PTT button on the
microphone while the radio is paused on the desired channel.
• The radio will remain on the active channel for three seconds after
the PTT button is released.
4. To exit the "auto-scan" mode, quickly press and release the Scan (~
button.
• The Scanning
(~icon
will turn off when the radio is no longer in
"auto-scan" mode.
To remove a channel from ~~auto-scan" mode:
1. Be sure the radio is turned on (see Power On/Off)
2. Use the Channel Up
.6.
or Channel Down .... button to scroll forward
or backward through the available channels until the Channel icon for
the channel you wish to remove shows on the LCD display.
Page
16
midlandusa.com