NEC UNIVERGE SV9100 Features And Specifications page 48

DT330 Compatibility Settings
ADA-L Unit Switch
Settings
ADA Connection for
Recording Only.
ADA Connection for
Sending Recorded Calls
to the Telephone.
To Send and Receive to
the Terminal
Lot Numbers: I, J – Hardware Revision
Lot Numbers: L, M, S – Software Revision
To verify DT-330 terminal firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the
terminal.
Firmware Compatibility Matrix
xxx I xx or lower
(Version 8.10 and 1, E0 or lower)
Terminal Lot Number
DT-330
xxxJxx or higher
(Version 2.20 or higher)
BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L Unit firmware,
hold down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
Default Settings
None
xxx I Lx or lower
(Version 1.E0 or lower)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7 and
8 are OFF. Switches 1, 4
and 6 are ON.
Not supported
48
Terminal Lot Number DT-330
xxx I Mx
(Version 8.10)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7 and
8 are OFF. Switches 1, 4
and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
BCH-L Unit Lot Number
xxxDxx or lower
Supported
Not supported
xxxJSx or higher
(Version 2.20 or higher)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches 4
and 6 are ON.
Dip switches 2, 3, 5, 7 and
8 are OFF. Switches 1, 4
and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches 4
and 6 are ON.
xxxExx or higher
Supported
Supported