NEC UNIVERGE SV9100 Features And Specifications page 26

Guide to Feature Programming
Program
Program Name/Description
Number
11-11-12 Service Code Setup (for Setup/Entry
Operation) – Alarm Clock
Customize the alarm clock used for registration
and setup.
System Options – Alarm Duration
20-01-06
Set the duration of the Alarm signal.
Operation
To set the alarm:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 827.
3. Dial alarm type (1 or 2).
 Alarm 1 sounds only once. Alarm 2 sounds each day at the preset time.
4. Dial the alarm time (24-hour clock).
 For example, for 1:15 PM dial 1315.
A confirmation tone is heard if the alarm has been set. If the alarm was not set, an error tone is heard
instead.
5. At the multiline terminal, press Speaker to hang up.
- OR -
At the single line telephone, hang up.
To silence an alarm:
1. At multiline terminal, press Exit.
- OR -
At the single line telephone, lift the handset.
 The single line set user hears Music on Hold when the handset is lifted.
To check the programmed alarm time at a multiline terminal:
1. Press Help.
2. Dial 827.
3. Dial alarm type (1 or 2).
 The programmed time displays.
4. Press Exit.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
0 ~ 64800 seconds
26
Default
827
30