Picture Control; Using Automatic Picture Settings - Samsung DynaFlat TX R2678WH Owner's Instructions Manual

O
P E R AT I O N

Picture Control

You can use the on-screen menus to change the contrast, brightness, sharpness, color and tint
according to personal preference.

Using Automatic Picture Settings

Your TV has automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset
at the factory. You can activate either Dynamic, Standard or Movie by pressing P.MODE (or by
making a selection from the menu). Or, you can select "Custom" which automatically recalls
your personalized picture settings.
1
Press the MENU button.
Press the ... or † button
to select "Picture", then
press the ENTER button.
2
Press the ENTER button to
select "Mode".
Press the ENTER button again.
Press the ... or † button
to select a particular item, then
press the ENTER button.
Press the EXIT button to exit.
Alternate method:
Simply press the P.MODE
button on the remote
control to select one of
the standard picture
settings.
• Choose "Dynamic" for viewing the TV during the day or when there is a
bright light in the room.
• Choose "Standard" for the standard factory settings.
• Choose "Movie" when viewing a Movie.
• Choose "Custom" if you want to adjust the settings according to personal
preference.
T V Picture
Mode : Dynamic
Size : 16:9
Tilt
T V Custom
Mode : Custom
Dynamic
Contrast
Standard
Brightness
Movie
Sharpness
Custom
Color
Tint G50
Color Tone : Cool 1
Reset
Dynamic
English - 37
√
√
√
100
45
50
50
R50