Changing Channels; Using The Channel Buttons; Using The Number Buttons; Using The Previous Channel - Samsung DynaFlat TX R2678WH Owner's Instructions Manual

O
P E R AT I O N

Changing Channels

Using the Channel Buttons

Press the CH or CH
When you press CH
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2" then "7".
The TV will change channels when you press the second
number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press "+100", then "2",
then "2".)
To change to single-digit channels (0–9) faster, press "0" before the single digit. (For channel
"4", press "0", then "4".)
Using the PRE-CH Button to Select the Previous Channel
Press the PRE-CH button.
The TV changes to the last
channel you were watching.
button to change channel.
or CH , the TV changes channels in sequence. You will see all the
English - 34
œ To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
button to select the second
channel. Then, use the PRE-CH
button to quickly alternate
between them.