3. Adjust the overall height of the headrest pad/mounting
post via the knob D.
For proper set-up the headrest should be adjusted to
the user's ear height.
4. Once the final height position is set, adjust the D-Ring
(with set-screw) so that it rests flush with the top of the
clamp assembly (to prevent slipping) C.
4.19.3 Adjusting Elan headrest hardware
Elan headrest hardware is highly adjustable. The illustration
below shows the possible adjustment ranges of the joints.
Upper multi-angle
A
rotational pivot
Upper linkage
B
Middle linkage
C
1585725-G
•
360° rotation
•
80° tilt
•
180° rotation
•
100° rotation
Lower linkage
D
Mounting post
E
Lower multi-angle
F
rotational pivot
Installing
•
2.5 mm Allen key
•
4 mm Allen key
•
5 mm Allen key
Setup
•
180° rotation
•
360° rotation in
90° increments
•
360° rotation
•
50° tilt
35