Toyotomi TKN-628R32 User Manual page 17

Introduction for buttons on remote controller
9
I SENSE button
Press this button to start I SENSE function and "
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I SENSE function and "
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.
When I SENSE function is turned on, the remote controller should be put within the
area where indoor unit can receive the signal sent by the remote controller.
10
TIMER ON / TIMER OFF button
TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, "
icon disappears and the word "ON" on re
" "button to adjust TIMER ON setting.
later, the time will change quickly until reaching your required time.
resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
started up, press "TIMER ON" button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button, "
" " button to adjust TIMER OFF setting.
later, the time will change quickly until reaching your required time.
Press "TIMER OFF" word "OFF" will stop blinking. "
Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
"TIMER OFF" button to cancel it.
" will be displayed on the remote
" will disappear.
17
" icon resumes displaying.
"
"
GB