Table of Contents
Advertisement
I cannot see the On
Have you locked the
Screen Display.
On Screen Display
(OSD) Menu to
prevent changes?
The screen shows
Is the screen
strange colors or
displaying only one
just black and white.
color as if looking at
the screen through a
cellophane paper?
Have the screen
colors become
strange after running
a program or due to
a crash between
applications?
Has the video card
been set properly?
The screen
Have you changed
suddenly has
the video card or the
become
driver?
unbalanced.
Have you adjusted
the resolution or
frequency to the
monitor?
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out of
Have you adjusted
focus or OSD
the resolution or
cannot be adjusted.
frequency on the
monitor?
LED is blinking but
Is the frequency
no images on the
properly adjusted
screen.
when checking the
Display Timing on
the menu?
There are only 16
Have the Windows
colors shown on the
colors been set
screen. The screen
properly?
colors have
changed after
changing the video
card.
Has the video card
been set properly?
There is a message
Have you installed
that reads
the monitor driver?
"Unrecognized
monitor, Plug & Play
See the video card
(VESA DDC)
manual to see if the
monitor found".
Plug & Play (VESA
DDC) function can
be supported.
Check when
MagicTune™ feature
MagicTune™ does
is found only on PC
not function
(VGA) with Window
properly.
OS that supports
Plug and Play.
Unlock the OSD by pressing the [
] button for at least 5 seconds.
Check the signal cable connection.
Make sure the video card is fully inserted in it's slot.
Reboot the computer.
Set the video card by referring to the video card
manual.
Adjust screen image position and size using the OSD.
Adjust the resolution and frequency at the video card.
(Refer to the
Preset Timing
Adjust the resolution and frequency of the video card.
(Refer to the
Preset Timing
Adjust the frequency properly by
referring to the video card manual
and the
Preset Timing
Modes.
( The maximum frequency per
resolution may differ from product
to product. )
Windows XP :
Set the resolution at the Control Panel → Appearance
and Themes → Display → Settings.
Windows ME/2000 :
Set the resolution at the Control Panel → Display →
Settings.
Set the video card by referring to the video card
manual.
Install the monitor driver according to the
Installation
Instructions.
Install the monitor driver according to the
Installation
Instructions.
* To check whether your PC is available for
MagicTune™ feature, follow the steps below (When
Windows™ is XP);
Control Panel → Performance and Maintenance →
System → Hardware → Device Manager → Monitors
Modes).
Modes).
Driver
Driver
Advertisement
Table of Contents
