Sleep Mode - Gigaware 2603143 User Manual

Plug in the Receiver
1. Remove the USB receiver dongle from the keyboard's
battery compartment.
2. Turn on your PC.
3. Plug the receiver into your computer's USB port.
4. Slide the G switch on the back of the keyboard to ON
(green). Your keyboard and receiver are automatically
paired.
n
Notes:
• If you do not plan to use your keyboard for a long time, slide
G switch to OFF (red) to save battery power.
• See your operating system's online help for additional
keyboard configuration information.

Sleep Mode

Your keyboard enters sleep mode if left idle for 10 minutes or if
you unplug the receiver from your USB port. To reactivate your
keyboard, press the Caps Lock key (not the touchpad area) or
reconnect the receiver (if unplugged).
4