Troubleshooting; Class 1 Laser Product - Gigaware 2603143 User Manual

Troubleshooting

If you have difficulty pairing your touchpad keyboard with your
computer, or if you have difficulty using the gesture controls:
• Make sure you have properly installed fresh batteries.
• Pair the keyboard and receiver again:
1. Place the keyboard within 2 inches of the receiver dongle.
2. Press and hold Right/Ctrl for 2 seconds then and slide the
switch to ON (green).
The power indicator flashes then turns off when pairing is
sucessful.
3. If pairing fails, switch the
pairing steps.

Class 1 Laser Product

This device uses a laser light beam and is classified as a CLASS
1 laser product. Do not attempt to disassemble this unit. Laser
rays from the optical pickup are dangerous to the eyes.
DANGER: Visible and invisible laser radiation is possible if open
or if the interlock fails or is defeated. Avoid direct exposure to
the beam.
CAUTION: There are no user-serviceable parts inside this unit.
Do not open the top cover. Make sure that pins or other foreign
objects do not get inside the keyboard. Only a qualified service
person should remove the cover or attempt to service this
device due to possible eye injury.
G
switch OFF (red), then repeat
13
G