Bose S1 Pro Owner's Manual
  1. Manuals
  2. Brands
  3. Bose Manuals
  4. Speakers
  5. S1 Pro
  6. Owner's manual

Bose S1 Pro Owner's Manual

Multi-position pa system
Hide thumbs Also See for S1 Pro:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Bose® S1 Pro
Multi-Position PA System
Owner's Guide
Guía del propietario
Guide d'utilisation

Advertisement

Table of Contents
loading

Related Manuals for Bose S1 Pro

Summary of Contents for Bose S1 Pro

  • Page 1 Bose® S1 Pro Multi-Position PA System Owner’s Guide Guía del propietario Guide d'utilisation...
  • Page 2 241 x 279 x 330 mm (9.5 x 11 x 13 inches). Using a tripod/stand that is not designed to support the size and mass of the S1 Pro system may lead to an unstable and hazardous condition that could result in injury.

  • Page 3: Table Of Contents

    General Purpose PA ................................14 Care and Maintenance Troubleshooting .................................... 16 Caring for Your Product ................................17 Cleaning ....................................17 Bose® S1 Pro Specifications ..............................17 Additional Information Contact Information ..................................18 Importer Information .................................. 18 Limited Warranty and Registration ............................18 Additional Information ................................

  • Page 4: Quick Setup Guide

    SIGNAL SIGNAL Please complete and retain for your records. Note: For use of the Bose® S1 Pro Multi-Position PA system with Serial number: _________________ an optional rechargeable battery (not included), see the battery Model number: _________________ accessory owner's guide on www.Bose.com.

  • Page 5: Welcome

    Multiple positions with Auto EQ allow the S1 Pro to be set down on the floor, up on a table or even mounted on a tripod stand, ensuring that you always sound your best. And with a 3-channel mixer, reverb, Bluetooth®...

  • Page 6: System Configurations

    Introduction System Configurations The versatile Bose® S1 Pro Multi-Position PA system operates in four unique modes. With Auto EQ, the system automatically updates to maintain optimum tonal balance for each coverage pattern. Use the examples below to quickly identify the best mode for your application.

  • Page 7: Operating Information

    AUX INPUT – Use a 3.5 mm TRS cable to connect a line-level audio source. Note: This input is muted when Bluetooth connectivity is active. LINE OUTPUT – Use a ¼" TRS cable to connect the line-level output to the Aux Input of a second S1 Pro, to create a mono two- loudspeaker setup. Note: Line Out is post mix.

  • Page 8: System Setup

    Connect Power Make sure the power switch is in Standby ( ). 2. Plug one end of the power cord into the connector on the S1 Pro. 3. Plug the other end of the power cord into a live electrical outlet.

  • Page 9: Set Channel 3 Controls

    • The most recently paired Bluetooth device will automatically sync when the S1 Pro is turned on. • The S1 Pro can only be paired with one device at a time; to pair to a new device, repeat "Bluetooth Pairing".

  • Page 10: Connection Scenarios

    Elevated Surface Place the S1 Pro on a tabletop in the front of a room to give a business presentation or place it in the bed of your pickup truck for a tailgate party. Plug in a microphone and narrate over a multimedia presentation or get your friends pumped up before the game while listening to music wirelessly via your Bluetooth®-...

  • Page 11: Tilt-Back

    System Setup Tilt-Back Place the S1 Pro in Tilt-Back position on the ground behind you for live musical performances. Tilting the loudspeaker onto it’s back edge creates a higher vertical coverage pattern, perfect for small audiences and passersby. Cue your backing tracks via Bluetooth® streaming and play along with a microphone and guitar.

  • Page 12: Monitor

    Monitor Place the S1 Pro on its horizontal side edge to use as a floor monitor. Face it toward the performer to be used as a personal monitor or send your mix to a main PA system, then dial in your equalization and reverb preferences for your performance.

  • Page 13: Speaker Stand

    Speaker Stand Using a conventional speaker stand, you can use your S1 Pro as a PA system. Connect a microphone and give a toast or sing a song while cuing the music wirelessly via Bluetooth® streaming. Use the line out to daisy-chain your S1 Pro into multiple units for more output and coverage.

  • Page 14: General Purpose Pa

    System Setup General Purpose PA Use a mixer with two S1 Pro systems as a conventional PA system. The wide and consistent coverage of the system ensures that the entire audience can easily hear the performance throughout the room. Stereo...
  • Page 15 Mono / Daisy-Chain Link two S1 Pro systems together in mono by using a TRS ¼" cable. Take the line out of the primary unit and plug it into the secondary S1 Pro system. Turn the channel volume up until both units are at desired volume.

Table of Contents