Epson EB-485Wi Installation Manual page 5

1 Package Contents
2 Specifications
3 Connecting Devices
4 Projection Distance Table
5 Installation Procedure
(1) Disassemble the parts
(2) Assemble the parts
(3) Install the wall plate on the wall
(4) Determine the projection distance and pull out the slider
(5) Route the cables through the setting plate
(6) Attach the setting plate to the wall plate
(7) Adjust the vertical slide to align it with the standard position
(8) Secure the projector to the setting plate
(9) Connect the power cord and other cables to the projector
6 Adjusting the Projection Screen
(1) Turn on the projector
(2) Change the aspect ratio
(3) Display the test pattern
(4) Adjust the focus
(5) Use the left adjustment dial to adjust the horizontal roll
(6) Use the right adjustment dial to adjust the horizontal rotation
(7) Use the top adjustment dial to adjust the vertical tilt
(8) Adjust the horizontal slide
(9) Adjust the forward/backward slide
(10) Adjust the vertical slide
(11) Turn off the display of the test pattern
7 Attaching the Covers
(1) Attach the wall plate cover and end cap
(2) Attach the cable cover to the projector
5
s p. 6
s p. 7
s p. 9
s p. 10
s p. 18
s p. 28
s p. 34