Connection To Power - Siemens milltronics MFA 4P Instruction Manual

Connection to power:

1 2
1 2
NO
RL1
• Terminal 10
• The equipment must be protected by a 15A fuse or circuit breaker in the building
installation.
• A circuit breaker or switch in the building installation, marked as the disconnect
switch, shall be in close proximity to the equipment and within easy reach of the
operator.
• AC input circuit, relay circuits, min. 14 AWG copper wire
• Recommended torque on terminal clamping screws, 7 in.lbs. max.
WARNING: All field wiring must have insulation suitable for at least
250 V.
Page 10
3 4 5 6
3 4 5 6
NC NO NC
RL2
RELAYS SHOWN IN
DE-ENERGIZED POSITION
250 V 8 AMP
must be connected to reliable ground.
MFA 4p – INSTRUCTION MANUAL
7 8 9 10
7 8 9 10
L2/N
PROBE
INPUT
11 12
11 12
L1
7ML19985FM01