Adding Inputs Or Outputs To A Lad Or Fbd Instruction - Siemens S7-1200 System Manual

2.3.4

Adding inputs or outputs to a LAD or FBD instruction

● To add an input or output, click the "Create" icon or right-click on an input stub for one of
● To remove an input or output, right-click on the stub for one of the existing IN or OUT
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
Some of the instructions allow you to create additional inputs or outputs.
the existing IN or OUT parameters and select the "Insert input" command.
parameters (when there are more than the original two inputs) and select the "Delete"
command.
STEP 7 programming software
2.3 Easy-to-use tools
41