Siemens S7-1200 System Manual page 325

Error_decode Error_code_1
(B#16#....) (B#16#....)
88 00 to FF
01
23
24
32
3A
89 00 to FF
01
23
24
32
3A
8A 00 to FF
8F 00 to FF
FE, FF 00 to FF
Array element STATUS[4]
With DPV1 errors, the DP Master passes on STATUS[4] to the CPU and to the instruction.
Without a DPV1 error, this value is set to 0, with the following exceptions for the RDREC:
● STATUS[4] contains the target area length from RECORD, if MLEN > the destination
● STATUS[4]=MLEN, if the actual data record length < MLEN < the destination area length
● STATUS[4]=0, if STATUS[4] > 255; would have to be set
In PROFINET IO, STATUS[4] has the value 0.
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
Explanation (DVP1)
area length from RECORD.
from RECORD.
8.3 Distributed I/O (PROFINET, PROFIBUS, or AS-i)
Description
Error in the eighth call parameter (with "RALRM
(Page 318)": TINFO)
Note: Refer to the online information system of STEP 7
for immediate access to information on how to interpret
the "TINFO" returned buffers.
Wrong syntax ID
Quantity structure exceeded or destination area too small
Wrong range ID
DB/DI number out of user range
DB/DI number is NULL for area ID DB/DI, or specified
DB/DI does not exist.
Error in the ninth call parameter (with "RALRM
(Page 318)": AINFO)
Note: Refer to the online information system of STEP 7
for immediate access to information on how to interpret
the "AINFO" returned buffers.
Wrong syntax ID
Quantity structure exceeded or destination area too small
Wrong range ID
DB/DI number out of user range
DB/DI number is NULL for area ID DB/DI, or specified
DB/DI does not exist.
Error in the 10th call parameter
Error in the 15th call parameter
Profile-specific error
Extended instructions
325