Samsung 794MB, 794MB+, 798MB, 796MB, 796MB+ Owner's Manual page 85

Question
How can I change the
frequency?
How can I adjust the resolution?
How can I set the Power Saving
function?
The monitor makes a sound
when it is turned on.
How can I clean the outer
case/Picture tube?
Highlight Zone III 3.5 Q & A
Question
The program does not function
properly.
Started a multimedia program
but the Highlight Zone function
does not automatically activate.
Changed the setting to Highlight
Zone in Manual Detect mode
but the Highlight Zone feature
has not been activated
Want to turn the Auto Detect
function off.
Don¡¯t know whether the
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
Windows ME/XP/2000 : Set the resolution at the Control
Panel → Display → Settings .
* Contact the video card manufacturer for details.
Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
computer or the screen saver. (Refer to Windows/Computer
Manual).
This is normal as some sound may be generated when the metal
case and the electromagnet, which are installed to block any
electromagnetic waves, interact with each other.
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case.
Do not allow any water to go inside the monitor.
Highlight Zone III 3.5 features a combination of circuitry and
software built on proprietary technology of SEC. Therefore, the
Highlight Zone III 3.5 feature is found only on SEC monitors that
support the feature.
Check if your monitor supports the Highlight Zone III 3.5 feature.
If not, the Highlight Zone III 3.5 icon will show a message saying,
"No Connection" ( )Connect the monitor properly before using it.
Neither Automatic Detect or nor Manual Detect function while the
icon shows the message, "No Connection". You can only exit the
program.
Check the Highlight Zone III 3.5 menu and see if Disable Auto
Detect is selected.
When selected, the Highlight Zone function is not automatically
activated.
The function may not be activated automatically for some
multimedia programs.
In this case, use Manual Detect instead.
See Manual Detect under
Check the color settings and see if sRGB is selected.
When sRGB is selected, the Highlight Zone function remains de-
activated in order to maintain the sRGB color attributes.
Check the color setting of the monitor and see if sRGB is
selected.
When sRGB is selected, the Highlight Zone function remains de-
activated in order to maintain the sRGB color attributes.
Some of the windows may not be selected when Highlight Zone
function is on.
Set Disable Auto Detect to off from the Highlight Zone III 3.5
menu.
See (Highlight Zone III 3.5
Check the icon on the taskbar.
Answer
Answer
(Highlight Zone III 3.5 )
functions)