Samsung 794MB, 794MB+, 798MB, 796MB, 796MB+ Owner's Manual page 25

Setup-For Multimedia model
1. Turn off your computer and unplug the power cord.
Connect the end of the signal cable to your computer's video port(video board, video card or
2.
graphics card).
Connect one end of the other sound cable to the Mic Input jack on your sound card or
3.
computer.Connect the other end of this cable to the Mic By-pass jack on the back of the
monitor stand.
4. Plug the DC power cord from the stand into a nearby outlet.
Connect the power cord for your monitor to the power port on the back of the monitor.
5.
6. Plug the power cord for the monitor and the power cord for your computer into a nearby
outlet.
7. Turn on your computer and monitor.
8. Turn up or down the On-Off control terminal on the stand of the monitor until it clicks.
Execute a sound program, music or sound effect in your computer and then adjust the volume
9.
by turning up or down until the sound volume is appropriate.
Adjust the treble and bass.
10.
Sound distortion may occur when the monitor is placed on top of a mostly hollow cabinet
such as your computer. If this occurs, place a pad or magazine beneath the monitor stand.
High sound volume may also cause sound distortion; lower the volume.
Multimedia Speaker Stand
1. Mic By-pass Jack
To transmit your voice,connect a sound cable from
the Mic By-pass jack to the mic in jack on the sound
card slot in your computer.
2. Stereo Input Jack
Connect a sound cable from the input source(sound
card,computer,CD-ROM drive).