Samsung SyncMaster 710NT User Manual page 37

Notice to Users
1) Use a PC with Windows 2000 Server/ 2003 Server OS as a host PC.
Two users cannot connect to Windows XP Home/Professional PC at the same time.
2) When a USB mouse is not recognized, separate and reconnect the USB mouse. The
mouse will be recognized.
3) Separating peripheral devices while booting up the Client may cause an error. Before
separating peripheral devices, make sure the power is off.
4) The automatic rotation function is only available when the monitor is directly
connected to a PC.
Client monitor does not support the automatic rotation function.
5) Restrictions of the Windows 2000 Server Operating System
Only Low Color (256 colors) screen quality is supported.
You cannot find the USB device connected to the monitor from the host PC.
Connecting the Monitor
Connect the power cord for your monitor to the power port on the back of the monitor.
1.
Plug the power cord for the monitor into a nearby outlet.
Using the D-sub (Analog) connector on the video card. Connect the D-sub Cable to the VGA
2-1.
IN port on the back of your monitor.
[ VGA IN ]
Connected to a Macintosh.
2-2.