Samsung SyncMaster 710NT User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster 710NT
  6. User manual
Samsung SyncMaster 710NT User Manual

Samsung SyncMaster 710NT User Manual

Hide thumbs Also See for SyncMaster 710NT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual Del Usuario
SyncMaster 710NT
Install drivers
Install programs

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster 710NT

Summary of Contents for Samsung SyncMaster 710NT

  • Page 1 SyncMaster 710NT Install drivers Install programs...
  • Page 2 Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Do not disassemble Do not touch Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode.
  • Page 3 Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage.
  • Page 4 Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.
  • Page 5 Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.
  • Page 6 If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire.
  • Page 7 Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable.
  • Page 8 When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model.
  • Page 9 keep the product unplugged. Do not place your children's favorite toys or any other objects of interest on the product. Proper Seating Posture During Monitor Use Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire.
  • Page 10 Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual User's Guide, Warranty Card Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) MagicTune™...

  • Page 11: Sold Separately

    Sold separately Keyboard (USB) Front Opens the OSD menu. Also use to exit the OSD menu or return MENU button [ ] to the previous menu. MagicBright™ is a new feature providing optimum viewing MagicBright™ environment depending on the contents of the image you are watching.
  • Page 12 4) Game 5) Sport 6) Movie >>Click here to see an animation clip When OSD is not on the screen, push the button to adjust Volume button[ ] volume. Adjust items in the menu. Adjust buttons [ Activates a highlighted menu item. / Enter button [ ] / Push the 'SOURCE', then selects the video signal while the OSD SOURCE button...

  • Page 13: Kensington Lock

    Connect a monitor to another monitor through a D-Sub cable. VGA OUT port The Kensington lock is a device used to physically fix the system to Kensington Lock something when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact the place of purchase.
  • Page 14 Tuning the power off while booting up a Client may damage the monitor. In addition, exit all running programs before turning the monitor off. What is Client Monitor? Client Monitor is a new type of monitor that can be used as a general monitor and can also be used as a terminal by connecting it to a host PC with a LAN connection so that you can use a Client Monitor to access the Internet, create a document and edit an image file.
  • Page 15 Connecting a Client Monitor 1) Connect to the host PC using a LAN cable Host PC 1. Connect the power cord to the power terminal at the back of the monitor. 2. Connect the mouse and the keyboard to the USB ports. 3.
  • Page 16 1. When starting the system for the first time, the Thin Client Setup Wizard is launched as shown below. If Next is not clicked during the 15 second countdown after the first 30 seconds, all settings are configured to the factory defaults and the setup wizard is exited. 2.
  • Page 17 3. Configure the resolution, the color settings, and the screensaver. Then click Next . 4. Select the shell interface to use with the terminal. Click Next to proceed to the next step.
  • Page 18 5. In the next window, set the other terminal properties and click on Next. For more information on terminal properties, refer to Environment 6. If you want to change any of the settings you have configured, click on Back or click on Finish to complete the Setup Wizard.
  • Page 19 3) Connecting to the Host PC You can add, edit or remove connections using the Shell)or the icon/menus on the Desktop. If you logged on as a limited user, the menus for configuring connections are hidden or deactivated. If you click the Add button or the Add New Connection menu on the Terminal Connection Manager, the New Connection window is displayed.
  • Page 20 Click Next to proceed to the next step. 2. Enter the name that will be displayed in the list on the Terminal Connection Manager (or as a connection icon on the Desktop) and click Next. 3. When you connect to the server, the server’s Desktop is displayed on the monitor, by default.
  • Page 21 6. Select compression, encryption, and sound options for ICA connection. 7. Enter the information required to pass firewalls or security policies. 2. Microsoft Remote Desktop Clinet 1. Enter a name for the connection and host PC’s name. The name you enter will be displayed in the list on the Terminal Connection Manager (or as a connection icon on the Desktop).
  • Page 22 2. If you want to log on the host PC automatically when connected, check the ‘Auto Login’ check box and enter user name, password and domain. Click Next to proceed to the next step. 3. When connected to the host PC, Window NT Desktop is displayed on the monitor, by default.
  • Page 23 5. If you want to change settings, select a new setting and click Edit. - General : Displays information such as the connection name and the host PC name when auto login is selected. - Display : Configures the screen resolution. Make sure to set a value higher than the minimum value that the computer you want to connect to supports.
  • Page 24 - Local Resources Remote Computer Sound : You can configure the sound so that you can easily identity the connection state. Local Device : Select one of the external devices which are being connected to the host PC computer you want to connect to. - Programs : Specify what is displayed on the first screen when connected.
  • Page 25 4) How to Configure Host PC To connect to a host PC from a client monitor, you must first add a user as described below: 1. Add a user to the host PC. Right-click My Computer on the Desktop and select Manage from the displayed menu.
  • Page 26 3. Right-click on the new user just created and select Properties from the displayed menu. Select the Member Of tab. If the User group entry exists in the list, remove it from the list. Note: A user account should belong to either the Administrators or Remote Desktop Users group so that it can logon to the host PC.

  • Page 27: Terminal Connection Manager

    6. Select Administrators or Remote Desktop Users from the list of groups displayed. Administrators: The members of this group have all access rights for the target computer and domain. Remote Desktop Users: The members of this group have the right to logon to the target computer remotely.
  • Page 28 ① Connect : Selects the host PC to connect to, or opens an Internet window. ② Shutdown : Icons/Menus on the Desktop (Desktop Shell) : Start > Shut down You can shut down or restart the system. ③ Setup : Icons/Menus on the Desktop (Desktop Shell) : Start>Settings>Control Panel You can configure the settings for the computers contained in the product.
  • Page 29 can right-click it and select Open from the displayed menu. To close a connection, click the Close button in the Configure tab of the Terminal Connection Wizard or close the connection window. The Close button is only activated if the selected connection is being connected. ※...

  • Page 30: Internet Options

    Internet Options With Internet Options in Control Panel, you can change the settings for Internet Explorer using the Internet Options applet on Control Panel. You can specify the home page which is displayed when the browser starts and a web page for searching which is displayed when the Search button is pressed.

  • Page 31: Software Setup

    Date/Time With Date/Time in Control Panel, you can configure date and time of the terminal using the Date/Time Properties window. Select a month using the arrow buttons and click a date. To change the AM/PM, hour, minutes, and seconds of the current time, click in each item and then enter a value directly or click the arrows buttons.

  • Page 32: Networking Tools

    The Terminal Information tab shows manufacturer, product information, OS version, and memory information, etc. You can also reset the terminal to factory defaults. Networking Tools With Networking Tools in Control Panel, you can view IP properties and check your network’s state using Ping and Trace Route. The IP Properties tab shows the IP address, subnet mask, gateway, DNS host PC, and WINS host PC for the selected adapter.

  • Page 33: Keyboard And Mouse

    the combo box. With the Preferences tab, you can configure update functionality settings. These settings are used when you update your terminal modules manually using a Terminal Manger program instead using Auto Update. With the Server Location tab, you can view a list of IPC host PCs that exists on your network.
  • Page 34 restarted. If you want to configure your terminal with fresh new settings, unselect the ‘Reset the system using the save configuration file’ option and click on Next. The next steps are the same as the steps when setting up your terminal for the first time. Desktop The thin client provides a Desktop Shell and a Thin Client Shell.
  • Page 35 1. You can enter basic information using the Terminal Local Account group. The user name is the required item to create a new account. (You cannot use symbolic characters and you can use up to 20 characters. If you want to set a password for an account, set a password within 20 characters long and make sure to confirm your password.) 2.
  • Page 36 If you want to apply the login functionality in order to allow access for allowed users only, check the Use login function check box. If you do not check this check box, the selected account is the same with the administrator account. If you check the Use login function check box, the Auto Login and the Set screensaver password check boxes are activated.
  • Page 37 Notice to Users 1) Use a PC with Windows 2000 Server/ 2003 Server OS as a host PC. Two users cannot connect to Windows XP Home/Professional PC at the same time. 2) When a USB mouse is not recognized, separate and reconnect the USB mouse. The mouse will be recognized.
  • Page 38 Connect the monitor to the Macintosh computer using the D-Sub connection cable. In the case of an old model Macintosh, you need to connect the monitor using a special Mac 2-3. adapter. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
  • Page 39 (Down-Stream 2, 2port) LAN (LAN Connection Terminal) D-sub 15-pin port [VGA OUT] For more detailed information, refer to the Using the Stand Connect USB devices such as a mouse, keyboard and external storage devices (e.g. DSC, MP3, external storage, etc.). (You cannot use these devices without connecting to the host PC or switching to the Client Office.) Connect the LAN cable.

  • Page 40: Tilt Angle

    Pivot Stand A. Stand Stopper You can only rotate the screen when the screen is lifted to its maximum height. Do not rotate the screen by force, as this might damage the stand. Tilt angle...
  • Page 41 Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
  • Page 42 Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ http://www.samsung.com/monitor http://www.sec.co.kr/monitor http://www.samsungmonitor.com.cn/ Windows ME 1. Insert CD into the CD-ROM drive. 2. Click "Windows ME Driver" .

  • Page 43: Windows Xp Operating System

    This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor momepage http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
  • Page 44 4. Click the " Properties " button on the " Monitor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6.

  • Page 45: Microsoft ® Windows ® 2000 Operating System

    " OK " button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the " Close " button then click " OK " button continually.

  • Page 46: Microsoft ® Windows ® Millennium Operating System

    1. Click " Start " , " Setting " , " Control Panel ". 2. Double click the " Display " Icon. 3. Choose the " Settings " tab and then click " Advanced.. ". 4. Choose " Monitor ". Case1: If the "Properties"...
  • Page 47 Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images.
  • Page 48 1. [ ] Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2. [ ] This button allows you to adjust items in the menu. 3. [ ] Press this button to Activates a highlighted menu item. 4.
  • Page 49 Menu Description When the ' AUTO ' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) To make the automatic adjustment function sharper, execute the 'AUTO' AUTO...
  • Page 50 >> MENU button Menu After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). OSD Lock & Unlock MagicBright™ Description You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature.
  • Page 51 Menu Push the MagicBright button to circle through available preconfigured MagicBright™ modes. - Six different modes (Custom/Text/Internet/Game/Sport/Movie) Volume Menu When OSD is not on the screen, push the button to adjust volume. Volume [ ] SOURCE Description Description...
  • Page 52 Menu Selects the video signal while the OSD is off. SOURCE Brightness Contrast Picture MagicColor Color Tone Color Coarse Fine Image Language H-Position Image Reset Color Reset Setup Information Picture Description Color Control Gamma Sharpness H-Position V-Position Transparency V-Position Display Time...
  • Page 53 Menu You can use the on-screen menus to change the brightness according to personal preference. Brightness Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness. MENU → → You can use the on-screen menus to change the contrast according to personal preference.
  • Page 54 Menu MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left.
  • Page 55 : This function is to adjust the vertical size of the MagicZone. The tone of the color can be changed and one of four modes can be selected - Cool, Normal, Warm and Custom. Color Tone (Not available in MagicColor mode of Full and MENU →...
  • Page 56 (Available in analog mode only) MENU → → Changes the clearance of image. (Not available in MagicColor mode of Full and Sharpness MENU → → Changes the horizontal position of the monitor's entire display. H-Position (Available in analog mode only) MENU →...

  • Page 57: Display Time

    appears on your monitor. V-Position MENU → → Change the transparency of the background of the OSD. Transparency MENU → → The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it Display Time is turned off.
  • Page 58 Menu Description Shows a video source, display mode on the OSD screen. Information MENU →...

  • Page 59: What Is Magictune

    Overview Installation OSD Mode Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting.

  • Page 60: Installation

    Overview Installation OSD Mode Installation Insert the installation CD into the CD-ROM drive. Click the MagicTune™ installation file. Select installation Language, Click "Next". When the Installation Shield Wizard window appears, click "Next." Select "I agree to the terms of the license agreement" to accept the terms of use. Color Uninstall Troubleshooting...
  • Page 61 Choose a folder to install the MagicTune™ program. Click "Install." The "Installation Status" window appears.

  • Page 62: System Requirements

    Click "Finish." When the installation is complete, the MagicTune™ executable icon appears on your desktop. Double-click the icon to start the program. MagicTune™ execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MagicTune™...
  • Page 63 Windows™ 98 SE Windows™ Me Windows™ 2000 Windows™ XP Home Edition Windows™ XP Professional It is recommended using MagicTune™ in Windows™ 2000 or later. Hardware 32MB Memory above 25MB Hard disk space above * For more information, visit the MagicTune™ website...

  • Page 64: Osd Mode

    Overview Installation OSD Mode MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor. When Rotation is functioning, portion of MagicTune™...

  • Page 65: Color Tab Definition

    - including web images and ones produced by a digital camera or scanner. MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality.

  • Page 66: Image Tab Definition

    images by enhancing the brightness, sharpness, saturation, Hue of a certain area on the screen. This offers an easy-to-use interface that highlights the video-playing portion of your multimedia program by automatically detecting and highlight the desired area by dragging. When the mouse cursor is activated( other tasks, right click your mouse, or put the activated cursor ( click.

  • Page 67: Option Tab Definition

    Sharpness Changes the clearance of image. Option Tab Definition You can configure MagicTune™ using the following options. Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To turn on or off any Preference, position the cursor over the box and click. Preferences Enable task tray menu .

  • Page 68: Color Calibration

    Overview Installation OSD Mode Color Calibration 1. Color Calibration Color Calibration guides you to get optimal color condition for your monitor. Proceed following 5steps for getting optimal monitor color condition . Control "Brightness control bar" for matching the brightness of control patch and the brightness of background pattern When you detect specific color tone on "Control patch", move the control cursor toward to the direction of the color tone referring to "Color reference Circle".
  • Page 69 Press "View Uncalibrated" button to see the original image.
  • Page 70 Overview Installation OSD Mode Uninstall The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the Windows™ Control Panel. Perform the following steps remove MagicTune™. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on Windows™...

  • Page 71: Troubleshooting

    Products from other manufacturers may cause errors. Only Samsung products are able to support this feature. An error may occur even when your monitor is manufactured by Samsung but is out of date. Check if your monitor is able to support MagicTune™.
  • Page 72 As the Highlight program uses the communication lines, please exit the Highlight program before you can access MagicTune™. Some of Samsung CDT monitors support the Highlight feature. When using both the Highlight feature and MagicTune™ simultaneously, conflicts occur, which cause errors.
  • Page 73 Visit the MagicTune™ and download the installation software for MagicTune™ MAC. the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/MagicTune Download the latest program. The program can be downloaded http://www.samsung.com/monitor/MagicTune...
  • Page 74 This greatly improves the user's productivity allowing him the flexibility to switch between landscape and portrait modes. The MagicRotation Software from Samsung Electronics, Inc. provides the user with a rotation feature (0, 90, 180, 270 orientation) that facilitates the optimum utilization of computer display screen, better viewing and improved user productivity.
  • Page 75 Installation Overview Interface Uninstall Troubleshooting Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicRotation installation file. 3. Select installation Language, Click "Next". 4. When the InstallShield Wizard window appears, click "Next." 5. Select "I accept the terms of the license agreement" to accept the terms of use.
  • Page 76 6. Choose a folder to install the MagicRotation program. 7. Click "Install." 8. The "Setup Status" window appears.

  • Page 77: Installation Problems

    9. Click "Finish." Have to reboot the system in order for the MagicRotation to work properly. 10. When the installation is complete, the MagicRotation executable icon appears on your desktop. Installation Problems The installation of MagicRotation can be affected by the factors such as video card, motherboard and the network environment.
  • Page 78 1. The "Display Driver" should be properly loaded for the MagicRotation to work properly. The installed "Display Driver" should be the latest driver supplied by the vendor. 2. If some applications like Windows Media Player, Real Player, etc. are not displaying movie files properly in 90, 180 and 270 orientations then do the following : Close the application.
  • Page 80 Overview Installation Interface When Rotation is functioning, portion of MagicTune™ program may not operate normally. AutoRotation : The screens display will automatically rotate when the monitor is rotated. To execute Auto Rotation, it should be done as below. Please install both MagicRotation and MagicTune™ 3.6 programs in your computer.
  • Page 81 Rotate to 90 : Display will be rotated 90 degrees from the current angle. Rotate to 180 : Display will be rotated 180 degrees from the current angle.
  • Page 82 Rotate to 270 : Display will be rotated 270 degrees from the current angle. Hot key : Hot Keys are available by default and can be changed by user. It can be assigned by user directly with keyboard after changing the existing HotKey .
  • Page 84 Overview Installation Interface Uninstall The MagicRotation program can be removed only by using the "Add/Remove Programs" option of the Windows Control Panel. Perform the following steps to remove MagicRotation. 1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on Windows™...

  • Page 85: Troubleshooting

    Overview Installation Interface Troubleshooting Before You Call Technical Support MagicRotation Software works with the installed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotation capabilities. If the installed "Display Driver" is working incorrectly or has bugs in it, then these bugs would still exist even after MagicRotation Software is installed.
  • Page 86 Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call Information section or contact your Symptom Check List No images on the Is the power cord screen.
  • Page 87 There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? I cannot see the On Have you locked the On Screen Display. Screen Display (OSD) Menu to prevent changes? The screen shows Is the screen displaying strange colors or just only one color as if looking...
  • Page 88 Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune Download the latest program. The program can be downloaded http://www.samsung.com/monitor/magictune. Troubleshooting...
  • Page 89 Internet in the Client If not, that indicates that the LAN connection is disconnected. In this screen. case, connect using another LAN cable. 2) Check if the settings of the 'Network' tab of 'Settings' have been properly set up. The default setting is "DHCP". If your network uses a static IP address, select 'Use the following IP address' and then enter the appropriate IP address information.

  • Page 90: Self-Test Feature Check

    How can I clean the outer case/LCD Panel? Self-Test Feature Check Self-Test Feature Check Warning Messages Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2.
  • Page 91 A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the SOURCE of the problem, and then contact the Service Center or your dealer.
  • Page 92 General General Model Name SyncMaster 710NT LCD Panel Size 17" Diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color...

  • Page 93: Environmental Considerations

    Dimensions (WxDxH)/ Weight 370.0 x 60.3 x 342.3 mm / 14.6 x 2.4 x 13.5 inch (Without Stand) 370.0 x 200.0 x 404.0 mm / 14.6 x 7.9 x 15.9 inch (with Basic Stand) / 6.25 kg Dimensions (WxDxH)/ Weight (Package) 508.0 x 235.0 x 431.0 mm / 20.0 x 9.3 x 17.0 inch / 8.45 kg VESA Mounting Interface 100 mm x 100 mm (for use with Specialty(Arm) Mounting hardware.)
  • Page 94 If you turn the Client monitor off while booting, it may damage the product. HID(Human Interface Devices) : Keyboard, Mouse MSC(Mass Storage Class) : Devices using the SCSI(Small Computer System Interface) command set : FAT(File Allocation Table) System Some manufacturers have wrongly specified their device as USB standard compatible. Our product has exception handling procedures.

  • Page 95: Frequency (Khz)

    Table 1. Preset Timing Modes Horizontal Display Mode Frequency (kHz) IBM, 640 x 350 31.469 IBM, 640 x 480 31.469 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC, 1152 x 870 68.681 VESA, 640 x 480 37.500 VESA, 640 x 480...
  • Page 96 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. CANADA 1-800-SAMSUNG (7267864) MEXICO 01-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) ARGENTINA 0800-333-3733 BRAZIL 0800-124-421 CHILE 800-726-7864 (SAMSUNG) COSTA RICA 0-800-507-7267...
  • Page 97 JAPAN 0120-327-527 MALAYSIA 1800-88-9999 PHILIPPINES 1800-10-SAMSUNG (7267864) SINGAPORE 1800-SAMSUNG (7267864) THAILAND 1800-29-3232, 02-689-3232 TAIWAN 0800-329-999 VIETNAM 1 800 588 889 SOUTH AFRICA 0860 7267864 (SAMSUNG) U.A.E 800SAMSUNG (7267864) http://www.samsung.com/cz http://www.samsung.com/dk http://www.samsung.com/fi http://www.samsung.com/fr http://www.samsung.de http://www.samsung.com/hu http://www.samsung.com/it http://www.samsung.lu http://www.samsung.com/nl http://www.samsung.com/no http://www.samsung.com/pl http://www.samsung.com/pt http://www.samsung.com/sk...

  • Page 98: Dot Pitch

    Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user.

  • Page 99: Information In This Document Is Subject To Change Without Notice

    Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

  • Page 100: Product Information (Image Retention Free)

    PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.
  • Page 101 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns.

  • Page 102: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment) - Europe Only

    Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

This manual is also suitable for:

Mj17assb710t-black

Table of Contents