Problems Related To Audio; Problems Related To Remote Control - Samsung SyncMaster 225MW User Manual

Power Indicator blinks green.
Screen is blank and power
indicator light is steady green or
blinks every 0.5 or 1 seconds
The screen is blank and is
blinking.

3. Problems related to Audio

Problems related to audio signals and their solutions are listed below.
Problems
No sound
The sound level is too low.
Sound is too high pitched or too
low pitched

4. Problems related to Remote Control

Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons do
not respond.
Q & A
Question
How can I change the frequency?
How can I adjust the resolution?
How can I set the Power Saving
The monitor is currently saving the changes made in settings
to the OSD memory.
The monitor is using its power management system.
press a key on the keyboard
If you see the "TEST GOOD" message on the screen when
you press the MENU button, check the cable connection
between the monitor and the computer to ensure that the
connector is properly connected.
Ensure that the audio cable is firmly connected to both the
audio-in port on your monitor and the audio-out port on your
sound card.
(Refer to the Connecting the
Check the volume level.
(Refer to the Volume)
Check the volume level.
(Refer to the Volume)
If the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
Adjust the Treble
Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the
vicinity.
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the
driver used. (Refer to the computer or the video card manual for
details.)
Windows XP :
Set the resolution in the Control Panel→Appearance and
Themes→Display→Settings.
Windows ME/2000 :
Set the resolution in the Control Panel→Display→Settings.
* Contact the video card manufacturer for details.
Windows XP :
Solutions
Monitor)
and Bass to appropriate level.
Items to check
Answer