Table of Contents
Advertisement
Installation
|
Screen
|
Audio
1. Problems related to Installation
Problems related to the monitor installation and their solutions are listed.
Problems
PC
It appears the PC does not
Mode
function normally.
The monitor screen flickers.
TV
TV screen is blurred or
Mode
shows noise signals.
TV signal is not received
2. Problems related to Screen
Problems related to the monitor screen and their solutions are listed.
Problems
Screen is blank and power
indicator is off
"Check Signal Cable" message
"Not Optimum Mode" message
Picture rolls vertically.
Image is not clear. Picture is
blurred.
Picture image is unstable and
vibrates.
Ghost images are shown in the
picture.
The image is too light or too dark
Screen color is inconsistent.
Color image is distorted with
dark shadows.
White color is poor.
|
Remote Control
Ensure that the power cord is firmly connected and the LCD
monitor is on.
(Refer to the
Ensure that the signal cable is firmly connected to the PC or
video SOURCEs.
(Refer to the
Ensure that the PC or video SOURCEs are turned on.
Check the maximum resolution and the frequency of the
video adapter.
Compare these values with the data in the
Modes
Check if the signal cable is securely connected.
Connect it again securely.
(Refer to
Run Frequency
Turn on again after removing all accessories
(video extension cable, etc.)
Set resolution and frequency to the recommended ranges.
Check if the resolution and frequency set for the computer
video card falls in the range supported by the monitor.
If not, reset them referring to the current
the monitor menu and
Adjust the Brightness and Contrast.
(Refer to the Brightness, Contrast)
Adjust color using
menu.
Solutions
Check if the Display Adapter Driver (VGA Driver) is
properly installed.
(Refer to
Installing
Driver)
Check if the signal cable between the computer and
the monitor is securely connected and tightened.
(Refer to
Connecting the
monitor)
Check if the TV antenna connector is securely
connected to the external antenna.
(Refer to
Connecting
TV)
Select "Auto Store" to configure the channel system
automatically. (Refer to the
Solutions
Connecting the
Monitor)
Connecting the
Monitor)
Chart.
Connecting the
monitor)
Coarse
and
Fine
Preset Timing
Custom
under OSD Color Adjustment
Auto
Store)
Preset Timing
tuning.
Information
under
Modes.
Hide quick links:
Advertisement
Table of Contents
