Toshiba D-VR4SU Service Manual page 16

Recording
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and set to the video input mode.
The One-touch Timer Recording
• Load a recordable DVD or video tape into the unit.
feature provides a simple and con-
• Press DVD or VCR to select the appropriate mode.
venient way to make a timed re-
cording.
Example: One-touch Timer Recording for 30 minutes.
1
Press REC MODE/SPEED to select the
recording mode.
For the recording mode, see the step 1 on
page 54.
2
Set the TV/CABLE option to the
appropriate position (See page
32).
3
Press numeric keys or CH
the channel to be recorded.
4
Press REC/OTR. Each additional press of REC/OTR will increase
recording time as shown in the chart below, up to a maximum of 6
hours. The OTR and recording time will appear on the screen for
about 4 seconds.
Press
once
twice
3 times
4 times
5 times
NOTE:
6 times
If you wish to watch the DVD play-
back during the VCR OTR, press
DVD to change to DVD mode and
perform the DVD playback. You can
To cancel OTR
also playback the VCR during DVD
Press STOP or turn off the power.
OTR.
" " will appear on screen for about 4 sec-
onds.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
56
Recording
Timer recording
4
Press
Press
NOTES:
5
Press
• If you select timer recording on a
Press
specified date only one time, select
press ENTER.
"ONCE" in the "TYPE" for record-
ing. You can record same days of
6
Press
every week or from Monday to Fri-
day using the item "TYPE". The Set the time when the recording is started.
items you can select are as follows: • To switch over the selection item (hour or minute), press
ONCE: Recording on the selected or
"DATE" • Press
EVERY SUN: Recording every Sun. • After setting the time, press ENTER.
EVERY MON: Recording every
Mon.
EVERY TUE: Recording every Tue.
EVERY WED: Recording every
Wed.
EVERY THU: Recording every Thu.
EVERY FRI: Recording every Fri.
EVERY SAT: Recording every Sat.
MON-FRI: Recording from Mon. to
Fri.
MON-SAT: Recording from Mon. to
Sat.
EVERYDAY: Recording everyday.
7
Press
• The starting and stopping times for
Set the stopping time in the same manner for setting the starting
the recording are displayed on the
time of timer recording.
12-hour (am/pm) clock. Twelve
o'clock midnight is displayed as
"12:00AM ", whereas twelve o'clock
8
Press
noon is displayed as "12:00PM".
• Press
• The initial setting of "REC TO" and
• You can select the external input (L1 or L2) by pressing
"REC MODE" can be changed us-
ing "Setting the recording". (See
9
Press
page 31.)
Select the media (DVD or VCR) to be recorded from the list and
press ENTER.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
10
other materials, is prohibited under Press
the Copyright Laws of the United The recording modes for the media selected in "REC TO" item
States and other countries, and are listed up.
may subject you to civil and/or Select the recording mode and press ENTER.
criminal liability. For the recording modes in VCR, see page 48, and for the re-
cording modes in DVD, see page 52.
58
VCR mode
00 : 00 : 00 SP
DVD mode
SP
TV - VHF/UHF channels
CABLE - CABLE TV channels
/ to select
CH 110
VCR mode
Recording time Press
Recording time
NORMAL REC 7 times OTR 3:00 OTR 0 : 30
CH 110
8 times
OTR - : - - OTR 4:00
9 times
OTR 0:30 OTR 5:00
DVD mode
OTR 1:00 10 times OTR 6:00
OTR 0 : 30
OTR 1:30 11 times NORMAL REC
OTR 2:00
or to select "TYPE" and press ENTER.
or to select "ONCE" from the list and press ENTER.
SETUP MENU
TIMER REC SET
REC REC
TYPE ONCE
TO MODE
ONCE
DATE (MM/DD) 11,08,03(--)
EVERY SUN
START 02:17
EVERY MON
EVERY TUE
END 03:17
EVERY WED
CH 000
EVERY THU
REC TO EVERY FRI DVD
EVERY SAT
REC MODE SP
MON-FRI
OK
SELECT
ENTER ENTER RETURN BACK SETUP END
or to select "DATE" and press ENTER.
or to select the date to be recorded from the list and
or to select "START" and press ENTER.
, then press ENTER.
or to adjust the time.
SETUP MENU
TIMER REC SET
REC REC
TYPE ONCE
TO MODE
DATE (MM/DD) 11/20(TH)
START 08:17PM
END 04:17PM
CH 01
REC TO DVD
REC MODE SP
OK
SELECT SELECT
ENTER ENTER RETURN BACK SETUP END
or to select "END" and press ENTER.
or to select "CH" and press ENTER.
or to select the channel to be recorded.
or
or to select "REC TO" and press ENTER.
or to select "REC MODE" and press ENTER.
Timer recording
The timer recording system allows
you to select the date, time and
channel and record the desired pro-
grams. Up to 12 timer programs
within a month can be stored in this
unit.
NOTE:
If a recordable tape is not inserted
or no disc space is available, the
timer record indicator " " flashes.
Replace the tape or disc to allow re-
cording.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
Timer recording
NOTES:
• Recording starts a few seconds be-
fore the preset starting time.
• You cannot use the timer recording
for the both DVD and VCR at the
same time.
• You can playback the DVD during
.
the VCR timer recording, and you
can playback the VCR during the
DVD timer recording.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
Setting timer recording
Preparation:
• Turn ON the TV and set to the video input mode.
• Load a recordable DVD or video tape.
• Press DVD or VCR to select the appropriate mode.
• Confirm that the clock is indicating the correct time.
Example: Set the recording mode to LP; the TV program is on channel
12 starting at 8:00 PM and stopping at 9:30 PM on a date of 20th.
1
Press SETUP.
The SETUP MENU screen appears.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
2
Press or to select "TIMER REC SET" and press ENTER.
The TIMER REC SET screen will appear.
SETUP MENU
TIMER REC SET
REC REC
DATE START END CH TO MODE
NEW
SELECT
ENTER RETURN BACK SETUP END
ENTER
3
Press or to select "NEW" and press ENTER.
The program screen will appear.
SETUP MENU
TIMER REC SET
REC REC
TYPE ONCE
TO MODE
DATE (MM/DD) 11/19(WE)
START 03:17PM
END 04:17PM
CH 01
REC TO DVD
REC MODE SP
OK
SELECT
ENTER RETURN BACK SETUP END
ENTER
SETUP MENU
TIMER REC SET
REC REC
TYPE ONCE
TO MODE
DATE (MM/DD) 11/20(TH)
START 08:00PM
END 09:30PM
CH 12
REC TO DVD
REC MODE LP
OK
SELECT
ENTER ENTER RETURN BACK SETUP END
11
Select "OK" and press ENTER.
The timer program is determined and the TIMER REC SET
screen appears again.
12
When you enter the other program for the timer recording, re-
peat the steps 3 to 11.
13
Press SETUP.
The TIMER REC SET screen disappears and the display will
return to the normal screen.
14
Press TIMER REC. The timer indicator " " will appear on the
display and the unit stands by for recording.
• If the program is DVD recording only, the unit will change to
VCR mode automatically. (The DVD mode cannot be selected.)
• If the program is VCR recording only, the unit will change to
DVD mode automatically. (The VCR mode cannot be selected.)
• If the programs are DVD and VCR recording, the unit will turn
off. If you want to use the unit, press TIMER REC again to
deactivate the timer.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1
and 2 of "Setting timer recording" and display the TIMER REC SET screen.
To change the timer recording, select the program to be changed and
press ENTER. The changing method is the same as that for the re-
cording a program for the first time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press CANCEL, then the
selected program will be erased from the timer recording list.
In case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
1 minute.
8 : 00 9 : 00 10 : 00 11 : 00
Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Prog.1 Prog.2 Prog.3
Control Settings
57
59