Toshiba D-VR4SU Service Manual page 10

Various settings
Setting the channel / Setting other items
This DVD/VCR is equipped with a channel memory
feature that allows you to skip channels up or down
to the next channel set in memory, hence skip over
unwanted channels.
Before selecting channels, they must be pro-
grammed into the DVD/VCR's memory. In addition
to normal VHF and UHF channels, this DVD/ VCR
can receive up to 113 Cable TV channels. To use
this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from
the factory, this menu option is in the CABLE mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "CH SETUP". For the procedure, see steps 1
to 3 in "Using the SETUP MENU" on page 23.
SETUP MENU
TIMER REC SET
CH SETUP
SYSTEM SETUP
TV/CABLE SELECT CABLE
AV SETUP
AUTO CH MEMORY PROCEED
ADD/DELETE PROCEED
REC SETUP
CH SETUP
OTHER
SELECT
ENTER ENTER RETURN BACK SETUP END
TV/CABLE SELECT
Select "TV/CABLE SELECT" and select "TV" or
"CABLE".
TV: VHF/UHF channels
CABLE: CABLE TV channels
AUTO CH MEMORY
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
When you select "AUTO CH MEMORY" and press EN-
TER.
The AUTO CH MEMORY function will be activated.
The channel display will count up and, when finished,
the screen returns to normal.
ADD/DELETE (channels)
You can add the channels you want or delete the chan-
nels you do not want manually.
Select "ADD/DELETE" and select "ADD" or "DEL." for
each channel.
• Press CH / to select the channel.
The numeric keys can also be used for selection.
• When you want to delete the selected channel, press
to select "DEL" and press ENTER.
• When you want to use the selected channel, press
to select "ADD" and press ENTER.
32
Disc playback
Playback by selecting a title
Preparation:
• Turn ON the TV and set to the video input mode.
When playing back a recorded
• Load a recorded DVD.
disc, you can display the title
• Press DVD to select the DVD mode. (The DVD indicator will light.)
menu and select the title to be
1
played back.
Press TITLE MENU.
The title menu will appear.
If there are many original titles and playlists...
Before pressing TITLE MENU, press DVD MENU until "VR ORG"
or "VR PL" will appear on the upper right of the TV screen, then
press TITLE MENU.
The first original title or playlist will be highlighted.
2
Press
NOTE:
When a disc that has been recorded
in the Video mode is finalized, the title
menu is automatically changed that
can be played back even with other
DVD players. Thumbnail image and
recording information will not appear
in the title menu after finalizing
3
Press ENTER.
— — — —
The selected title is played back.
1/1
11/23/2005 08:41AM 006 SLP
NOTES:
11/25/2005 10:03PM 011 SP
11/29/2005 11:30AM 009 SP • If you don't display the title menu and press PLAY, the first title is
12/01/2005 06:52PM 006 XP
played back.
11/23/2005 08:41AM 006 SLP PL
• The title menu is used not only for playing back titles but also for
editing various discs and titles. For details of editing operation, see
page 62.
PREV
NEXT
• If you create a playlist, an original title and playlist appear in the title
menu. For creating a playlist, see page 63.
• In case the disc includes more than 10 titles, you can turn to the next
or the previous page. Press
previous page. To return to normal use, press
• You cannot switch to the VCR mode when the title menu is showing.
Press TITLE MENU to clear the title menu, then press VCR to switch
to the VCR mode.
34
You can set the switching interval between played
back images in the slide show mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "OTHER". For the procedure, see steps 1 to 3
in "Using the SETUP MENU" on page 23.
SETUP MENU
TIMER REC SET OTHER
SYSTEM SETUP
JPEG INTERVAL OFF
AV SETUP
REC SETUP
CH SETUP
OTHER
ENTER ENTER RETURN BACK SETUP END
JPEG INTERVAL
You can select the interval time for JPEG slide show
(page 46).
Select "JPEG INTERVAL" and select the switching in-
terval between images from the below.
OFF: The slide show mode is not used.
5 SEC: The interval is set to 5 seconds.
10 SEC: The interval is set to 10 seconds.
15 SEC: The interval is set to 15 seconds.
Playlist
Thumbnail image
Original titles
Recording information
TITLE MENU
DISC NAME:- - - -
REC DATE :11/23/2005
11/23/2005 08:41AM 006 SLP
TIME :08:41AM
11/25/2005 10:03PM 011 SP
LENGTH :00:30:17
11/29/2005 11:30AM 009 SP
CHANNEL :006
12/01/2005 06:52PM 006 XP
REC MODE :SLP
11/23/2005 08:41AM 006 SLP PL
SELECT SET
TITLE
ENTER PLAY RETURN BACK END
MENU
or to select the title you want to playback.
TITLE MENU
DISC NAME:- - - -
REC DATE :11/29/2005
11/23/2005 08:41AM 006 SLP
TIME :11:30AM
11/25/2005 10:03PM 011 SP
LENGTH :00:59:45
11/29/2005 11:30AM 009 SP
CHANNEL :009
12/01/2005 06:52PM 006 XP
REC MODE :SP
11/23/2005 08:41AM 006 SLP PL
SELECT SET
TITLE
ENTER PLAY RETURN BACK END
MENU
, then press or to display next/
.
Disc playback
Playback procedure
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD to select the DVD mode. (The DVD indicator will light.)
1
Press OPEN/CLOSE.
The disc tray will open.
2
Insert a disc.
Disc without a cartridge
Insert with the playback side
down.
Place a disc to fit the guide.
If a disc is out of the guide, it may
result in damage to the disc or
malfunction.
DVD-RAM disc with cartridge
(TYPE1/TYPE2/TYPE4)
Single sided
Turn the printed side up, and
insert the cartridge into the tray
frame following the direction of the
NOTES:
arrow on the cartridge.
• If a non-compatible disc is loaded,
Double sided
"INCORRECT DISC", "REGION
Turn the desired recording/playback side up, and insert the
CODE ERROR" or "PARENTAL
cartridge into the tray frame following the direction of the arrow
ERROR" will appear on the TV screen
on the cartridge.
according to the type of loaded disc.
3
In this case, check your disc again
Press OPEN/CLOSE to close the
(See pages 9 and 25).
disc tray.
• Some discs may take a minute or so
"READING" appears on the screen
to start playback.
and some discs start playback au-
• A prohibition symbol " " may appear
tomatically.
at the upper right of the screen. This
• A menu screen may appear on
symbol means either the feature you
the TV screen, if the disc has a menu feature. In this case, press
tried is not available on the disc, or the
,
DVD/VCR can not access the feature
4
at this time. This does not indicate a
Press PLAY to start playback.
problem with the DVD/VCR.
5
Press STOP to end playback.
• When you set a single-faced disc label
• The DVD/VCR memorizes the stopped point, depending on
downwards (ie. the wrong way up) and
the disc. "
press PLAY or OPEN/CLOSE,
" " keeps blinking in the display until the playback is stopped
"READING" will appear and then it will
completely. Press PLAY to resume playback (from the scene
change to "NO DISC".
point).
• Some playback operations of DVDs
• If you press STOP again ("
may be intentionally fixed by software
VCR will clear the stopped point.
producers. Since this DVD/VCR plays
DVDs according to the disc contents
6
Then press OPEN/CLOSE.
the software producers designed,
The disc tray opens.
some playback features may not be
Remove the disc and press ON/STANDBY.
available. Also refer to the instructions
The disc tray closes automatically and DVD/VCR turns off.
supplied with the DVDs.
• When playing DTS-encoded Audio
CDs, excessive noise will be heard
from the analog stereo outputs. To
avoid possible damage to the audio
system, the consumer should take
proper precautions when the analog
stereo outputs of the DVD/VCR are
connected to an amplification system.
Checking media information
Preparation:
Various information on the loaded
• Turn ON the TV and set it to the video input mode.
disc can be displayed on the TV
• Load the disc.
screen.
• Press DVD to select the DVD mode. (The DVD indicator will light.)
1
Press DISPLAY.
Media information will appear.
2
Press DISPLAY while the media information above is displayed.
The next media information will appear.
*The remaining time displayed during recording may be different
from the actual remaining time. When you want to check the cor-
rect remaining time, stop recording and display the media infor-
mation again.
3
Press DISPLAY again while the media information above is dis-
played. The media information will disappear.
*If you press DISPLAY during chase playback, the information
screen is displayed.
The symbols indicate that the player is in chase playback.
The progress bar shows the current position of playback and the
NOTES:
position of recording. Normally the recording position is shown
• The displayed information varies
as being at 100%. Items other than these appear the same as on
with the type of media.
a normal information screen.
• Some information may not appear
due to media type or operating
conditions.
• In stop mode, some information
does not appear.
READING
, , or ENTER to operate a menu feature.
" appears on the screen for approx. 4 seconds.
" appears on the screen), the DVD/
33
The number of titles and present title number
Playback elapsed time
Playback condition
present time
(playback, stop,
present channel
pause and record)
CLOCK 10:27 AM CH 03
Current
TITLE 01/35 TIME 00:25:41
subtitles
CHAPTER 08/38 SUBTITLE OFF
language
ANGLE 01/01 REC MODE SP
AUDIO 01/03ENG Dolby Digital
The number of Recording mode
audio languages
and present
language
The number of angles and present angle number
The number of chapters and
present chapter number
Title
Media type
Disc name
DISC NAME - - - -
MEDIA TYPE DVD VIDEO
TITLE ORIGINAL35
REMAINING TIME - - - - /SP
DISC PROTECT NO
FINALIZED YES
Finalize
Disc protect
Remaining time*
CLOCK 12:00 AM CH 007
TITLE 02/02 ORG TIME 00:05:15
CHAPTER 01/01 SUBTITLE - - /- -
Current recording
ANGLE 01/01 REC MODE SP
AUDIO 01/01
position
(Fixed at 100%)
Current Playback
position
35