Table of Contents
Advertisement
9. Novell NetWare Driver Installation
Driver Config Options:
/V
Verbose Mode provides detail information about driver on sys-
tem command line when driver is initialized.
/!V
Non Verbose Mode (default)
/L
Driver assumes that all targets have more than one LUN
/!L
Driver assumes that all targets only have LUN 0 (default)
/T:xxxx
Target enable mask WORD (Default scan all targets)
/B:b,dd
Scan device only on PCI BUS #b, PCI DEVICE #dd
/B:b
Scan all the devices on PCI BUS #b (from 0 to 7)
/Q:q
Specifies maximum number of tag commands per target (default 4)
/!Q
No tag
/WR
Read after write, hardware verify
/!WR
Not verified (default)
/R
Support removable media (default)
/!R
Will not support removable media
/D
Enable support for fixed disk drive (default)
/!D
Disable support for fixed disk drive
ASUS PCI-SIU2 User's Manual
61
Advertisement
Table of Contents
