Table of Contents
Advertisement
7. Microsoft Windows 98 Driver Installation
New Windows 98 Installation
These instructions will guide you through the installation of the ASUS host
adapter driver while installing Windows 98. Windows 98 will be installed
from either a CD-ROM or floppy diskettes. It is important that the hardware
and DOS 4.01 or higher have been installed successfully before proceeding
further. If installing from a SCSI CD-ROM drive, it is important that the
ASUS ASPI driver, and CD-ROM driver be installed before proceeding fur-
ther.
1
Access the Windows 98 CD-ROM from either the DOS prompt or
from Microsoft Windows 3.x File Manager. Execute the SETUP.EXE
program and follow the instructions on your screen. If you are install-
ing from floppy diskette, insert the Windows 95 Setup Disk 1 in your
floppy disk drive and boot your system. Follow the instructions on
your screen.
2
Once a Windows 98 session is established, use your installed mouse
or the appropriate key strokes to select MY COMPUTER from the
MAIN DESKTOP. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER
icon.
•
Select SYSTEM from within the CONTROL PANEL group
•
Select DEVICE MANAGER tab from within the SYSTEM group
•
Select the OTHER DEVICES category from within the DEVICE
MANAGER listing.
•
Select the PCI-SCSI Bus Controller sub-category from within
the OTHER DEVICES listing.
•
In the PCI-SCSI Bus Controller Properties window, select the
DRIVER tab, then select "Change/Update Driver," then click
"Next".
•
SELECT "Search".
•
Check "Specify a Location", enter "A:\win95", and click "Next".
46
ASUS PCI-SIU2 User's Manual
Advertisement
Table of Contents
