Table of Contents
Advertisement
6. MS Win 95/95b (OSR2) Driver Installation
Updating the ASUS Win 95/95a Device Driver
1
Once a Windows 95 session is established, use your installed mouse or
the appropriate key strokes to select MY COMPUTER from the Main
Desktop. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER
group.
•
Select SYSTEM from within the CONTROL PANEL group.
2
Select the DEVICE MANAGER tab from within the SYSTEM group.
•
Select the SCSI CONTROLLERS category from within the DE-
VICE MANAGER listing.
•
Select one of the PCI SCSI Host Adapter sub-categories from
within the SCSI CONTROLLERS listing (or select any other PCI-
SIU2 class of drivers if you are using an older ASUS board).
•
In the SCSI HOST ADAPTER PROPERTIES window, select the
DRIVER tab, then select "CHANGE DRIVER...".
•
In the SELECT DEVICE window, select "HAVE DISK...".
3
In the INSTALL FROM DISK window, enter the ASUS Driver path
name:
•
Insert the PCI-SIU2 Driver Disk 1 into drive A:
•
Type: A:\WIN95, select "OK"
4
Select PCI SCSI Host Adapter, select "OK" to install the
INIA100.MPD driver onto your hard disk drive.
It may be necessary to direct Windows to look for the driver in A:\win95
before the driver can be copied. This step may need to be repeated
more than once.
This completes updating the Host Adapter Driver. Follow the on-screen direc-
tions to restart you computer and activate the new driver.
40
ASUS PCI-SIU2 User's Manual
Advertisement
Table of Contents
