Bluetooth; How Do I Pair My Device; Do I Need Bluetooth® To Use The App; If The Qr Or Security Code Label Fade Or Become Damaged, Will I Still Be Able To Bluetooth® Pair - ResMed AirMini Faqs

6. Bluetooth

6.1. How do I pair my device?

Before connecting the AirMini machine to a smart device, ensure that the latest version of the AirMini
app is installed on the smart device. If not, download the AirMini app from the app Store™ or Google
Play™.
1. Ensure that the AirMini machine is set up correctly and plugged into a power source.
Refer to the machine user guide for additional information on setup.
2. On the smart device, enable Bluetooth®.
Refer to the smart device user guide for instructions on enabling Bluetooth®.
3. The first time you open the AirMini app, you will be asked to consent to the use of cookies and
to accept ResMed's Terms and Conditions and Privacy Policy.
Check the box on the Welcome screen and then tap Continue.
4. On the AirMini machine, press the Bluetooth® button when prompted by the AirMini app.
When the light on the AirMini machine starts to flash blue, Bluetooth® is enabled on the
machine and ready to connect.
5. On the smart device, tap Connect.
When the AirMini machine is discovered, the machines name, ResMedXXXXXX, will appear
in the accessory selection list.
6. Select the machine name from the list to connect.
7. The first time you pair the AirMini machine with the smart device, you will need to perform the
authentication procedure.
When prompted by the AirMini app, begin the authentication process by tapping Scan code.
You will be prompted by the AirMini app to allow the use of the smart device's camera and to
position the machine's QR code within the camera's viewing frame
Note: The QR code is located on the back of the AirMini machine.
Alternatively, you can authenticate by entering the four-digit key located on the back of the
machine.
8. Tap Continue. When successfully connected, the Bluetooth® connection icon is displayed in
the top right corner of the AirMini app.
Notes:
•
As long as the AirMini is plugged into a power source, it is turned on and in standby mode.
•
If the AirMini is plugged into a power source, leaving Bluetooth® enabled on the smart device
ensures that each time the smart device comes within the vicinity of the AirMini, connection
will occur automatically.
•
You should only pair a smart device with one machine at a time.
6.2. Do I need Bluetooth® to use the app?
Yes. Bluetooth® is needed to pair and connect your compatible smart device to the AirMini machine.
6.3. If the QR or security code label fade or become damaged,
will I still be able to Bluetooth® pair?
If the QR code on the device is not readable you can try the four-digit code instead. If neither are
readable due to damage or fading on the device label, then you should contact your healthcare
provider/ResMed representative for assistance.
ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia ResMed.com (8)