Connecting Subwoofer Via Line In - Loewe klang 5 Operating Manual

Hide thumbs Also See for klang 5:

Table of Contents

Loewe klang 5 subwoofer

Operating manual

Connecting Subwoofer via LINE IN

Connecting Loewe klang 5 subwoofer via LINE IN

Via the LINE IN analogue interface, you can connect the klang 5 subwoofer to your TV set or any audio source.

Disconnect all devices from the mains before connecting.

Connect the analogue audio output AUDIO OUT

use the supplied 3.5 mm jack/2 x cinch audio cable. If an audio source is used, which has separate jacks for left/right; use appropriate standard cinch cables.

Connect the speaker of the Loewe klang 5 series that is positioned to the left of your TV set to the white jack (LEFT) of the subwoofer using a cinch cable.

Connect the speaker of the Loewe klang 5 series that is positioned to the right of your TV set to the red jack (RIGHT) of the subwoofer using a cinch cable.

Connect the cables to the speaker according to the corresponding installation instructions.

Use the mains cable supplied to connect the 220-240 VAC 50/60 Hz socket of the klang 5 subwoofer to a 220-240V 50/60 Hz socket.

If the menu item TV speaker is active in the sound components wizard of the Loewe TV set, it may happen that after turning on the TV set, the klang 5 subwoofer

connected to AUDIO OUT is operated at a high volume. Therefore, select in the sound components wizard first the Speaker system (AUDIO OUT)

16) before connecting the subwoofer to the mains.

Mains socket

Mains cable

For Loewe TV sets as of chassis SL3xx and software V2.2.13 without AUDIO OUT connector, use the HEADPHONE connector.

of the TV set or of another audio source with the LINE IN audio inputs LEFT/RIGHT of the subwoofer. To do so,

Audio cable 3.5mm jack / 2x cinch

klang 5 subwoofer

AUDIO OUT

Cinch cabel

(see page

TV-set