WIRELESS DIGITAL AUDIO LINK (5.2 system) ..........8 Connection/set-up solution with two subwoofers via DIGITAL AUDIO LINK and LOEWE KLANG LINK (5.2 system) ......9 Connecting Subwoofer via Digital Audio Link ........10 Connecting Subwoofer via LINE IN ............11 Settings directly on the Subwoofer ............
The Loewe klang 5 subwoofer is designed for Loewe TV sets and Loewe speaker systems. The device has a powerful bass amplifier and is prepared for wireless opera- tion with the Wireless Digital Audio Link function.
Air circulation and high temperatures • Dust Under no circumstances, the air supply of the Loewe klang 5 subwoofer may be obstructed. Make sure it is far enough away (> 10 cm) from the • Covering which obstructs air circulation floor or wall.
Exercise due care when handling tools. Preparing the subwoofer Remove the separate package from the Loewe klang 5 transport box. Lift the subwoofer out of the box and place the subwoofer with its top side on a soft, clean surface. You can use the fleece from the packaging material.
10 SUBWOOFER POSITION – Setting/display of the subwoofer position SERVICE – Service interface for internal purposes 11 PAIRING/RESET – Establishing the connection to Loewe klang link (Wireless 5 LINE OUT – LEFT/RIGHT – Audio output left (analogue) Digital Audio Link)
Only one of the given examples is possible at the same time. Your speakers and subwoofers have been already prepared by Loewe for wireless operation at the factory. The function can be used with the Loewe klang link box. Connector/set-up solution with one subwoofer (2.1 system) To do this, connect the box to your TV set using the DIGITAL AUDIO LINK cable.
Connection/set-up solution with two subwoofers via DIGITAL AUDIO LINK and LOEWE KLANG LINK (5.2 system) If you use a 5.2 system with a Loewe klang link box, you can connect the speakers and subwoofers much more easily and without much effort. This applies also to other connection/set-up solutions using the Loewe klang link box.
Disconnect all devices from the mains before connecting. Using the included digital audio link cable, connect the DIGITAL AUDIO LINK interface of the Loewe TV set to the DIGITAL AUDIO LINK IN interface of the klang 5 subwoofer. If you want to connect another klang 5 subwoofer or klang 5 speaker, connect the DIGITAL AUDIO LINK OUT interface of the first subwoofer/speaker to the DIGITAL AUDIO LINK IN interface of the second subwoofer/speaker.
Use the mains cable supplied to connect the 220-240 VAC 50/60 Hz socket of the klang 5 subwoofer to a 220-240V 50/60 Hz socket. If the menu item TV speaker is active in the sound components wizard of the Loewe TV set, it may happen that after turning on the TV set, the klang 5 subwoofer connected to AUDIO OUT is operated at a high volume.
DIGITAL AUDIO LINK, the POLARITY and SUBWOOFER GAIN Selecting ON: settings can only be made via the TV set. A local change on the klang 5 subwoo- When being in mode ON, the subwoofer will automatically switch off after 4 fer will not result in a feedback to the TV set.
Page 13
The adjustment range of -6 dB to +6 dB can be changed in steps of 1 dB. The The Loewe klang link box is not included in the set of equipment supplied. corresponding LED will light up for the values -6 dB, 0dB and +6dB. For inter- When pressing the PAIRING/RESET button, the subwoofer is ready to be wire- mediate values, the LEDs will be dimmed accordingly.
Proceed to next step. Once you have selected Pairing and aroused the speaker/subwoofer by pres- sing any button, press the PAIRING button for every Loewe klang 5 speaker/ subwoofer. The speakers/subwoofer and your TV set connect themselves now automatically. The connected speakers/subwoofer are now shown in the The speakers currently found are displayed.
Page 15
Loewe klang 5 subwoofer Operating manual Configuration of the subwoofer via Digital Audio Link TV loudspeakers Adjust speaker as centre level speaker Select whether you want to use the TV speaker as centre speaker. Proceed to Distance to left front speaker.
Connect Configuration of the klang 5 subwoofer (LINE IN) speakers Configure the sound components wizard of the Loewe TV set telling that you use a klang 5 subwoofer that is connected to AUDIO OUT via LINE IN of the TV set.
Software update Software update via DIGITAL AUDIO LINK loudspeakers If a new version of the Loewe klang 5 subwoofer software is available during an as centre update of the TV software, it will also be updated via the DIGITAL AUDIO LINK speaker interface.
< 0.6 Conformity / Manufacturer’s declaration Setting range of intensity [dB] +6/-6 Loewe Technologies hereby declares that this product meets the essential requirements and other relevant provisions of Directive Transmission range (acoustic) 29 Hz–150 Hz (± 3 dB) 2014/53/EU and all applicable EU directives.
Page 19
Loewe klang 5 subwoofer Service Loewe Technologies GmbH, Plug&Play Ltd. Kpartners, SIA Service Center Loewe Qualifi Pty Ltd A.Čaka iela 80 Customer Care Center Bednjanska 8, 10000 Zagreb Aptekarsky per.4 podjezd 5A 24 Lionel Road Rīga, LV-1011, Latvia Industriestraße 11...